- Joined
- Apr 8, 2024
- Messages
- 183
I need some recommendations for fuel for my Zenoah 260 PUM on my thunderboat. Nooby here. Do I take one gallon of 93 octane non-alcohol fuel and add 2 stroke oil? How much oil do I add to a gallon of gas?
Need gas fuel help!!!
- Thread starter Jeffrey Hammond
- Start date
Help Support Intlwaters:
- Joined
- May 1, 2023
- Messages
- 337
standard 87 octane + 8oz of klotz super techniplate. your zenoah is basically a 2 stroke lawn mower engine. It doesnt care what you throw in it.
93 octane will make is slower.
93 octane will make is slower.
- Joined
- Apr 21, 2008
- Messages
- 559
I take 1 gallon Coleman or Crown camp light fuel and add 10 ounces of Red Line 2 stroke oil.
No nasty smell in the car
No nasty smell in the car
- Joined
- Oct 2, 2005
- Messages
- 8,013
But my oil is Mercury O/B synthetic oil.I take 1 gallon Coleman or Crown camp light fuel and add 10 ounces of Red Line 2 stroke oil.
No nasty smell in the car
Rick Sowell
Well-Known Member
- Joined
- May 17, 2007
- Messages
- 483
Any good 2 cycle oil and mix it at the OIL manufacturers recommendations. what ever the bottle tells you to.
after all it is a chain saw/weed eater motor.
after all it is a chain saw/weed eater motor.
- Joined
- Nov 22, 2002
- Messages
- 1,023
A lot of testing has been done. For our engines 8-10 oz per gallon is the norm. I personally run 10 oz to 100 oz of fuel. Regular non ethanol unleaded or camp fuel. Running what the oil manufacturer says will burn up parts. Cylinder seal will increase with more oil. Then it becomes a matter of keeping the rod bearing alive. We are stressing these things way beyond design limits.
- Joined
- May 1, 2023
- Messages
- 337
100:1!
- Joined
- Oct 24, 2002
- Messages
- 4,574
yea we not cutting grass, it needs 8-10 oz to a gallon
- Joined
- Apr 8, 2024
- Messages
- 183
Guys
This is all great info!! I have also been reading on the Klotz site and does anyone run R50?
Sounds like Coleman fuel is the best choice on the gas side……at least the least stinky, buy it in a can, few additives, etc. also very expensive, but if you don’t run much, it doesn’t really matter.
This is all great info!! I have also been reading on the Klotz site and does anyone run R50?
Sounds like Coleman fuel is the best choice on the gas side……at least the least stinky, buy it in a can, few additives, etc. also very expensive, but if you don’t run much, it doesn’t really matter.
- Joined
- Nov 25, 2003
- Messages
- 16,386
50% Coleman camp fuel, 50% 110 octane low lead aviation gas and 8oz. of a good quality oil per gallon. Rock solid performance and no smell. If it's a new motor don't run synthetic oil until you've put at least 2 gallons of fuel thru the it.
- Joined
- Oct 24, 2002
- Messages
- 4,574
I was thinking the aviation gas has no smell, right?50% Coleman camp fuel, 50% 110 octane low lead aviation gas and 8oz. of a good quality oil per gallon. Rock solid performance and no smell. If it's a new motor don't run synthetic oil until you've put at least 2 gallons of fuel thru the it.
LohringMiller
Well-Known Member
- Joined
- Jan 25, 2017
- Messages
- 954
We did some serious fuel testing. See below:
Lohring Miller
Lohring Miller
- Joined
- Apr 8, 2024
- Messages
- 183
Don
That’s some great information, and thanks for the heads up on the new engine/synthetic oil thing. My engine is, in fact, brand new, so I need to find the correct oil. Suggestions?
That’s some great information, and thanks for the heads up on the new engine/synthetic oil thing. My engine is, in fact, brand new, so I need to find the correct oil. Suggestions?
- Joined
- Nov 25, 2003
- Messages
- 16,386
Well...... if you stick your nose right over the can it does but won't stink up your shop or your vehicle.
- Joined
- Nov 25, 2003
- Messages
- 16,386
Can't go wrong with this one-
Attachments
Robert Krescanko
Member
- Joined
- Jun 1, 2011
- Messages
- 10
I used to run Klotz and Quicksilver but there was a lot of carbon buildup on the piston. I changed over to Amsoil Dominator and no carbon. Clean as a whistle
- Joined
- May 1, 2023
- Messages
- 337
cause it flashes at a much lower temperature. if you're not burning off castor blends you're too rich or not running hard enough to get the heat needed to flash it.I used to run Klotz and Quicksilver but there was a lot of carbon buildup on the piston. I changed over to Amsoil Dominator and no carbon. Clean as a whistle
- Joined
- Nov 25, 2003
- Messages
- 16,386
That Amsoil is synthetic. You cannot properly break in a new motor on synthetic and Jeffrey's motor is new.I used to run Klotz and Quicksilver but there was a lot of carbon buildup on the piston. I changed over to Amsoil Dominator and no carbon. Clean as a whistle
- Joined
- Jan 3, 2009
- Messages
- 289
Agree with Don , Mercury quick silver is easy to get and will be great for a stock engine. I’ve been using Castor927 that’s another option but not as easy to get.
- Joined
- Oct 2, 2005
- Messages
- 8,013
Yeh,
The Quicksilver oil you can get at Walmart. Along with yer Coleman or Crown camp fuel.
One stop shop!!
Similar threads
