• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts For Sale Used Picco EXR Silver Head Square Bottom

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

longballlumber

Well-Known Member
Joined
Apr 17, 2003
Messages
1,603
Pics should tell the story. The pinch area of the P/S looks great, feels great and has no gouges or excessive detonation. I can confirm the motor has new bearings. However it does look like it suffered a bottom end rod failure at one point in time. many of the parts show modifications. If I had a mono or a rigger I would keep it and run it. I purchased to run in my scale and I just don’t think this motor set up is right for my heavy scale.

$250 shipped in the US. I can deliver at the Nats in Huntsville next week.

Thanks, Mike
 

Attachments

  • IMG_6285.jpeg
    IMG_6285.jpeg
    2.1 MB
  • IMG_6286.jpeg
    IMG_6286.jpeg
    2 MB
  • IMG_6287.jpeg
    IMG_6287.jpeg
    1.8 MB
  • IMG_6289.jpeg
    IMG_6289.jpeg
    1.9 MB
  • IMG_6288.jpeg
    IMG_6288.jpeg
    2 MB
That motor needs a rigger… hell,, there’s more sleeve below the exhaust port than above it..
With that penthouse shaped variable timed exhaust port, the timing must be in the 200’s 🤣

Holes everywhere!! The piston is light because there’s not much left of it !! 🤣

Just messing with ya’
I can see why it would have a hard time dragging around a scale .. no torque..
Needs to be in a nice and light rigger where it can turn some “R”’s!!

BTW,, I’d give you a buck fifty for it shipped… 👍
 
Back
Top