- Joined
- Apr 20, 2011
- Messages
- 2,163
Looking for the later style housing with lube hole.
-
If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Parts Wanted PTO NR46DD
- Thread starter John Beardslee
- Start date
Help Support Intlwaters:
- Joined
- Oct 25, 2004
- Messages
- 1,141
I have a complete assembly including flywheel if interested. It is new, has to come off a new engine who is still resting in an unopened bag.
- Joined
- Apr 20, 2011
- Messages
- 2,163
Thanks Joern
I’m interested but let’s give it a little time to see if something from the US becomes available.
John
I’m interested but let’s give it a little time to see if something from the US becomes available.
John
Rich Junker
Well-Known Member
- Joined
- Oct 6, 2022
- Messages
- 116
Hi John. Where is the lube hole located on the later style housing? I haven't seen one of those. I assume it's to get more lube to the rear bearing back at the flywheel.
Thanks.
- Joined
- Apr 20, 2011
- Messages
- 2,163
Rich
It is drilled through the piston relief cut on an angle to let fuel into the area between the two bearings of the pto housing.
John
It is drilled through the piston relief cut on an angle to let fuel into the area between the two bearings of the pto housing.
John
- Joined
- Apr 20, 2011
- Messages
- 2,163
Rich
I’d be interested in an early housing that I can drill myself as long as the seal area not damaged.
Thanks, John
I’d be interested in an early housing that I can drill myself as long as the seal area not damaged.
Thanks, John
Rich Junker
Well-Known Member
- Joined
- Oct 6, 2022
- Messages
- 116
Hey John. Unfortunately i don't have a extra one. I Just have the one engine that i run. I was just curious where the hole was located. Thanks for the info.
JamesShields
Well-Known Member
- Joined
- Mar 23, 2015
- Messages
- 281
- Joined
- Apr 20, 2011
- Messages
- 2,163
Yes sir, that’s it right there. Thanks James! Both of mine are in engines and I was going to disassemble for a photo unless necessary.
John
John
- Joined
- Apr 20, 2011
- Messages
- 2,163
Is that pto for sale Jim??
Rich Junker
Well-Known Member
- Joined
- Oct 6, 2022
- Messages
- 116
Thank you! James.
JamesShields
Well-Known Member
- Joined
- Mar 23, 2015
- Messages
- 281
Just happened to have one apart for bearings
- Joined
- Apr 20, 2011
- Messages
- 2,163
Similar threads
Latest posts
-
-
-
-
-
-
First rigger to build for impba p (4s) or Q(6s)
- Latest: Eriel Garrastegui
-
PHOTOS - Cincinnati, OH 2024 IMPBA Oval Trials- Latest: Mario Johnston
-
