• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts Wanted K/B 3.5 drum motor

shop deals on amazon
Shop deals on ebay
Advertise with us
Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The original .21’s didn’t have a disk or drum intake rotor they used the outboard intake and side mounted it and fuel was distributed through a slot in the crankshaft
 
When I first started running in the early 70's all we had were Veco 19's. The Taipan came out but they were subject to crankshaft's breaking although a little better than the Veco. And then the front carb K&B' and right after was the OPS 3.5. The advantage with the OPS was the carb and the tuned pipe and they ran pretty good. I bought a Picco 3.5 and the piston and cylinder weren't a good match with no compression. I was told Picco had a problem with the fitment, but I pretty much stopped running so never replaced the piston and sleeve. Now I have a new Picco that needs a piston and sleeve.
 
Anthony Asaro said:
When I first started running in the early 70's all we had were Veco 19's. The Taipan came out but they were subject to crankshaft's breaking although a little better than the Veco. And then the front carb K&B' and right after was the OPS 3.5. The advantage with the OPS was the carb and the tuned pipe and they ran pretty good. I bought a Picco 3.5 and the piston and cylinder weren't a good match with no compression. I was told Picco had a problem with the fitment, but I pretty much stopped running so never replaced the piston and sleeve. Now I have a new Picco that needs a piston and sleeve.
Click to expand...
Yup, those old OPS 3.5 side port motors would run forever… my first mono had an OPS in it and I won a ton of trophies with it… I even ran it at the IMPBA nat’s in 1988.
The piston and sleeve were so loose I could push the piston all the way out of the top of the sleeve.. but it still ran good.
get a little heat in it on 50% and it ran great..

I’m currently in the process of building a nostalgic version of my first one..
White and yellow .20 Husselcraft with a NIB OPS .21 side port. Two blade X440 prop.
May even put my Futaba square box wheel radio in it on channel 80. 😁👍
 
Grimracer said:
I don't charge for info and pictures... bahaaaaaa. (the motor is not for sale).. sorry for the confusion.

Grim
Click to expand...
Could you tell me if the one you have has the thin head button for short plugs or the thick head button for long plugs. I bought a box of 5 used engines at the nationals last week and the engines had both types. I was wondering what they came with out of the factory. I always thought the early version with the intake on the side took short plugs and the new drum rotor version took long plugs.
 
I am SURE.. i can double check.. the thicker head button. (13mm motor) the 12mm motors (Short head button) the cases are not interchangeable with the 13. If you pull the head off and the liner is notched for the head bolts.. its a 12mm (others help correct me if you have more info)

Grim
 

Similar threads

R
Parts For Sale 3.5 Adjustable Outboard Motor Mount
Replies
0
Views
248
Roger Lee Hooks Sr
R
J
Parts Wanted K&b 3.5 carb needle
Replies
3
Views
360
Zimmerman
Z
NAMBA860
Parts Wanted Exhaust throttle
Replies
0
Views
178
NAMBA860
NAMBA860
Ronnie Lerew
Sold RED 3.5 K&B Carb
Replies
2
Views
334
Ronnie Lerew
Ronnie Lerew
J
OPS 80 drum valve
Replies
0
Views
117
James Woody
J

Latest posts

Back
Top