• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Used OPS .67 w pipe

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mikemalloy

Well-Known Member
Supporting Member
Joined
Apr 19, 2018
Messages
332
*****$135.00 motor and pipe shipped lower 48 states.*****

OPS 67 Red head. Mac pipe?
I removed this from a rigger I recently purchased. Really good compression, spins over, carb slide barrel smooth operation. more than likely it needs bearings which I have none for this and not familiar w/OPS.
I haven't ran or taken apart to inspect. I think it s a Mac pipe it measures 14 7/8" length, .780 in ID @ header, .420 ID @ Muff 2.25 DIA @center.
Lowered to $135.00 shipped lower 48.
 

Attachments

  • riggerops1.jpg
    riggerops1.jpg
    59.6 KB
  • riggerops2.jpg
    riggerops2.jpg
    57.3 KB
  • riggerpipe.jpg
    riggerpipe.jpg
    67.6 KB
Last edited:
Hey everyone, I'm not familiar with the OPS line and this pipe so if I'm way off on the price let me know. Or is this just not a desirable engine?
 
Last edited:
Hey everyone, I'm not familiar with the OPS line and this pipe so if I'm way off on the price let me know. Or is this just not a desirable engine?
$225.00 shipped lower 48 states.
The engine has been out of production for years.
Though some say you can get parts at Mantoua (SP) in Europe. Unconfirmed.
So to answer your desirable question, you have to find the right person.
$225. In today's market is a bit high.
The pipe is not an OPS pipe, it is a Mac's Exhaust tuned pipe.
 
I made you an offer for the motor in your other post, that was not including the pipe.
that is about the going rate for a “sight unseen” OPS .67 or .80 … and I’ve bought a ton of them here.

I will pay more if:

1) You provide pictures of the piston and sleeve and head button.

2) Pull the back plate and confirm if the motor is a bushed rod ( both ends) or a needle rod, and/or if it has a RPM rod in it. (Yes, you will have to pull the wrist pin to confirm the bushing) (pictures please.)

For the right motor, I’ll even meet your asking price above, but just rolling the dice,, my other offer stands.

I would add another 30 bucks if you include the pipe though…
 
The engine has been out of production for years.
Though some say you can get parts at Mantoua (SP) in Europe. Unconfirmed.
So to answer your desirable question, you have to find the right person.
$225. In today's market is a bit high.
The pipe is not an OPS pipe, it is a Mac's Exhaust tuned pipe.
Is it a Mac that looks identical to a prather pipe I have
 
Pics of OPS 67, it looks to be in good condition. Sleeve looks like it was worked on not sur if you can see it in pic#1. I can retake if needed. Piston good no pitting ect...
 

Attachments

  • OPS1.jpg
    OPS1.jpg
    57.1 KB
  • OPS2.jpg
    OPS2.jpg
    39.3 KB
  • OPS3.jpg
    OPS3.jpg
    45.7 KB
  • OPS4.jpg
    OPS4.jpg
    42.8 KB
Back
Top