• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts Wanted .21 Outboard Conversion Kit

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have a new lights crank and also a modded Rody Roem crank (both suit 14mm crank Nova/Top motors) I might part with for the right money...I also have the Rody Roem PTO shaft (no housing)
 
Here is the modded lights crank and also the Techno Power crank from Rodys original outboards...not the VS outboards he did more recently.
These Technopower cranks fit novarossi motors. Biggest difference is that they have a 9mm center hole, while the lights came standard at 10mm. This lights has been bored out to 10.40mm.

Not sure on what they are worth...I think the lights has very high timing ground into it, the technopower is still very conservative.

PTO shaft shown still in packet also
 

Attachments

  • 20240629_235211.jpg
    20240629_235211.jpg
    1 MB
  • 20240629_235225.jpg
    20240629_235225.jpg
    1.1 MB
  • 20240629_235239.jpg
    20240629_235239.jpg
    638.9 KB
  • 20240629_235652.jpg
    20240629_235652.jpg
    964.9 KB
Here is the modded lights crank and also the Techno Power crank from Rodys original outboards...not the VS outboards he did more recently.
These Technopower cranks fit novarossi motors. Biggest difference is that they have a 9mm center hole, while the lights came standard at 10mm. This lights has been bored out to 10.40mm.

Not sure on what they are worth...I think the lights has very high timing ground into it, the technopower is still very conservative.

PTO shaft shown still in packet also
Kris what would you want for the Techno Power Crank and the PTO Shaft?
Thanks
Ron
 
Back
Top