Zuber's Prop Nuts distributors list

[bzubee]

I just want to remind everyone of the many different distributors that now handle Zuber's Prop Nuts. So they are availble all over the country from any of these distributors and also direct from Zuber's Prop Nuts, Huntsville, AL

Remember these are mil. spec. aircraft grade, all metal, non- rusting, self-locking nuts for both ***1/4" Shafts and ***3/16" shafts.

***All nuts should be torqued to at least 15 inch pounds***

CMDi Competition Marine Design, Andy & John Brown

Gas Parts+, Wes Young, Senoia, GA

G & M Models, Gary Preusse in the Chicago area

Phil's Hobbies, Bob Kensil, Ft Wayne, IN

Radio Active Hobbies, Dusty Fielder, Liberty, TX

RC Boat Parts.Com, Bryan Robinson, San Gabriel, CA

Rossi Sales of America, Bill McGraw, Memphis, TN

Southern Performance, Matt Allingham, Tiverton, RI

UPT Hobbies International, Khemoe Foy, St. Thomas, VI

Vidosh RC Motorsports, Mark Vidosh Oxford, MI

Carlo Cantalanotto, Harahan, LA

Kevin Sheren, Lansing, MI

Ronald Cook, Bettsville, OH

Malichi Bartley St. Louis, MO

Mike Shuttleworth, Hazelwood, MO

Doug Anderson, Baltimore, MD

I 'd like to announce 3 new dealers for Zuber's Prop Nuts.

1. Jim Shiply from Folsom, CA

2. Jorge Ruiz from San Juan, Puerto Rico

3. Don Ferrette from Mechanicsville, VA

 

[bzubee]

I 'd like to announce 3 new dealers for Zuber's Prop Nuts.

1. Jim Shiply from Folsom, CA

2. Jorge Ruiz from San Juan, Puerto Rico

3. Jack Rabbit Racing owner Don Ferrette from Mechanicsville, VA

Correction Gas Parts Plus is owned by Wes Young

 

[Don Ferrette]

Yup, carrying the good stuff from Bill. And that would be Jackrabbit Racing, not a rabbit named Jack. :lol: :lol: :lol:

 

[John Knight]

Yup, carrying the good stuff from Bill. And that would be Jackrabbit Racing, not a rabbit named Jack. :lol: :lol: :lol:

Don,

Thanks for pointing out the difference. I was confused for a moment. KIDDING!!

Bring a bag of both sizes to Atlanta with you and I'll get some.

 

[topfuel443]

Oh come on John, You can splurge, spend $4, and get FOUR bags! LOL, giving you a hard time from 5000 miles away, ya gotta love technology huh John?

Ive always enjoyed Mr Zubers Nuts..... no wait....not literally of course... :blink:

~James

 

[John Knight]

Oh come on John, You can splurge, spend $4, and get FOUR bags! LOL, giving you a hard time from 5000 miles away, ya gotta love technology huh John?

Ive always enjoyed Mr Zubers Nuts..... no wait....not literally of course... :blink:

~James

Gabe,

I am assuming that Don will be bringing bags of 100 count each and not 4 count. I want more than 4. about a dozen will do. As for Bill's nuts, I will leave that alone and up to you. Forever.

John

 

[topfuel443]

the only way ive seen them packaged from Zuber is in packs of four for a buck, maybe Ferrette has the "inside line" and sells them in larger quantity packages.

Once again, Mr Zuber has great Nuts, as you will soon find out. h34r:

~Gabe

 

[Don Ferrette]

Yup, carrying the good stuff from Bill. And that would be Jackrabbit Racing, not a rabbit named Jack. :lol: :lol: :lol:

Don,

Thanks for pointing out the difference. I was confused for a moment. KIDDING!!

Bring a bag of both sizes to Atlanta with you and I'll get some.

I will have them as well as my needle bases with me this year.

Ive always enjoyed Mr Zubers Nuts..... no wait....not literally of course... :blink:

~James

That was wrong in sooooo many ways! :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

 

[bzubee]

Well I have another new Distributor in Minnesota, Frank Laursen of Laursen Boats [email protected]

 

[Steve Seebold]

I 'd like to announce 3 new dealers for Zuber's Prop Nuts.

1. Jim Shiply from Folsom, CA

2. Jorge Ruiz from San Juan, Puerto Rico

3. Jack Rabbit Racing owner Don Ferrette from Mechanicsville, VA

Correction Gas Parts Plus is owned by Wes Young

who can I talk to if I wanna buy these nuts in quantity? I use them on my outdrives. Each drive takes 5 8-32 nuts and I like to buy them 1,000 pieces at a time.

 

[DeanJohnson]

How many outdrives do you have??? LOL

 

[bzubee]

Steve I sell them to speedmaster and a few other places when I get back home after Christmas call me at 2563613325 or email [email protected] and I'll get you a good price for an order of 1000 .

 

[Steve Seebold]

Today I have 8 drives in stock, but I’m gonna keep 3 of them for some of my new builds. 1000 nuts will make 200 drives.

I’m building a Y-6 with a Cotton Mouth Zenoah 320, a Y-15 with a stock Zenoah 260 and a Y-19 with a Quickdraw Pioneer 30.5.

 

[bzubee]

Steve I can get you a 1,000 8-32 nuts like you use on the struts for $275+ $10 shipping PayPal address is [email protected]. I will have to order them since I do not carry that size in those quantities normally . It takes about a week to get them from the distributer. Make sure to include your mailing address with your payment Steve.

 

[bzubee]

Steve I'm back home now so you can send payment for the nuts and send me your mailing address if you want to order the 1000 8-32 nuts?

 

[Steve Seebold]

Thanks Bill, I was getting desperate so I found some at a local supplier. I bought enough to build 30 drives and I paid a lot more than what you quoted me.

Next time I’ll get them from you.

 

[bzubee]

Okay no problem. Have a good new year.

 

[Bill Brandt]

Noting this was a 2006 posting I would like to note i also offer 10-32 and 1/4 28 Zubers at allrc1.com


Happy New Year,
Bill Brandt