WTB/WTTF P260 (1/4" hub)

[BB Mods's]

SS or other is fine, s/b is a plus.

 

[Ray Sametz]

SS or other is fine, s/b is a plus.

P260 is only 3/16 shaft. I'll look may how one.

 

[BB Mods's]

There was a guy on fleabay selling a P260 ss knockoff (decent casting work) with a 1/4" hub on it, figured some one had to have one

 

[FloridaScaleBoater]

I have a prather B-260 3/16 hub I can do up for you

Rick

 

[rocketcity]

Have S-260 (Raw) in stock

RCR

 

[BB Mods's]

Guess ill be sticking a new flex shaft in the boat, iv got a worked 260 but 3/16 bore.... Any other 60mm props with a 1/4" hub?

 

[Doubledog]

Perhaps try two other ways....

Turn down a 1/4" prop shaft to 3/16" or take a close prop and reduce the diameter. Either way is fairly cheap and easy.

Also, looking at my prop charts here's what I came up with as the smallest in 1/4" bore...

ABC 25** series @ 65mm dia.

Octura X467

Will have to check but I think Propshop makes some a tad smaller dia.

Later. Jamie

 

[BB Mods's]

Thanks, I put a 3/16th's step down shaft in the boat.