WTB starter handle for Sullivan Dynatron and collet insert mac45

[XtremeRcBoats]

Hi,

I'm in need for the insert (the brass part) of the collet on my MAC45, see picture below. Don't know the brand of the collet, Aeromarine perhaps?

I'm also looking for a starter handle for a Sullivan Dynatron 24V starter.

Who can help me out? Can only pay with paypall and must ship to the Netherlands.

Thanks,

 

[kamijenna]

Speed Master on the collet, & for the starter handle lenny Blake With Rum Racing Namba 19

 

[Terry Flynn]

Try aero marine

http://www.aeromarinerc.com/shafts.htm

 

[XtremeRcBoats]

Try aero marine <a href="http://www.aeromarinerc.com/shafts.htm" target="_blank">http://www.aeromarinerc.com/shafts.htm</a>

Had a look at the rocketcity site, and looks like an aeromarine collet. It appears there are 2 inserts, one a large pattern, other is small pattern. Can anybody tell me what the difference is?

Thanks,

 

[Tom Levescy]

Paul,

Yes. you have an Aeromarine colet and there are 2 inserts, a .187 size and a .250 size.

Your photo looks like you have a .187, when you buy them get a few for spares .

Tom.

 

[rocketcity]

Paul,Yes. you have an Aeromarine colet and there are 2 inserts, a .187 size and a .250 size.

Your photo looks like you have a .187, when you buy them get a few for spares .

Tom.

Paul,

Have all in stock..

 

[mrgary]

Hi,
I'm in need for the insert (the brass part) of the collet on my MAC45, see picture below. Don't know the brand of the collet, Aeromarine perhaps?

I'm also looking for a starter handle for a Sullivan Dynatron 24V starter.

Who can help me out? Can only pay with paypall and must ship to the Netherlands.

Thanks,

here is where you can get the handle,,,, http://www.rossisales.com/when you go to this web site,,go to other products,,it comes up in the pic,,gary

 

[XtremeRcBoats]

Tom i know i have the .187 version, but found out aeromarine has a insert with a large pattern? see link1 and one with a small pattern, see link 2.

Can you tell me the difference or perhaps which one i have in the picture?

link 1, large pattern insert

link 2, small pattern insert

 

[Don Ferrette]

Tom i know i have the .187 version, but found out aeromarine has a insert with a large pattern? see link1 and one with a small pattern, see link 2.
Can you tell me the difference or perhaps which one i have in the picture?

link 1, large pattern insert

link 2, small pattern insert

The large insert is for the bigger collets. If on the fixed part of the collet (against the flywheel) the hex is a 9/16" wrench size you need the small insert. If it is 5/8" wrench size you need the large insert.

 

[XtremeRcBoats]

Tom i know i have the .187 version, but found out aeromarine has a insert with a large pattern? see link1 and one with a small pattern, see link 2.
Can you tell me the difference or perhaps which one i have in the picture?

link 1, large pattern insert

link 2, small pattern insert

The large insert is for the bigger collets. If on the fixed part of the collet (against the flywheel) the hex is a 9/16" wrench size you need the small insert. If it is 5/8" wrench size you need the large insert.

Don, tnx for the info. Checked the collet and it's the 9//16" size, so it must be the small pattern. According to Allan Yuen from who I recently bought the engine, this is your old mac45.

 

[ALLAN YUEN]

Tom i know i have the .187 version, but found out aeromarine has a insert with a large pattern? see link1 and one with a small pattern, see link 2.
Can you tell me the difference or perhaps which one i have in the picture?

link 1, large pattern insert

link 2, small pattern insert

The large insert is for the bigger collets. If on the fixed part of the collet (against the flywheel) the hex is a 9/16" wrench size you need the small insert. If it is 5/8" wrench size you need the large insert.

Don, tnx for the info. Checked the collet and it's the 9//16" size, so it must be the small pattern. According to Allan Yuen from who I recently bought the engine, this is your old mac45.

small pattern insert for 1/2"or large pattern insert for 9/16" will you order use small pattern insert to Aeromarine dealer

 

[XtremeRcBoats]

Tom i know i have the .187 version, but found out aeromarine has a insert with a large pattern? see link1 and one with a small pattern, see link 2.
Can you tell me the difference or perhaps which one i have in the picture?

link 1, large pattern insert

link 2, small pattern insert

The large insert is for the bigger collets. If on the fixed part of the collet (against the flywheel) the hex is a 9/16" wrench size you need the small insert. If it is 5/8" wrench size you need the large insert.

Don, tnx for the info. Checked the collet and it's the 9//16" size, so it must be the small pattern. According to Allan Yuen from who I recently bought the engine, this is your old mac45.

small pattern insert for 1/2"or large pattern insert for 9/16" will you order use small pattern insert to Aeromarine dealer

Thanks Allan, found a small pattern insert.