WTB Race Ready(Got it!!!!)

[Ray Sametz]

Looking for a S&B H-31 or H-32 B) Stock is fine.

 

[Will Gallagher]

Ray, what size shaft? I have a some that are for 3/16 shaft.

 

[Ray Sametz]

My bad Will, the h-30 is 3/16 shaft. Need prop for 1/4 shaft. Will revise post to read h-31 or 32.

 

[Don Ferrette]

My bad Will, the h-30 is 3/16 shaft. Need prop for 1/4 shaft. Will revise post to read h-31 or 32.

There is a BIG difference between an H31 & H32, ABC prop numbering progression doesn't always make sense. The H31 is a 68mm prop yet the H32 is a 62mm prop but the H26 is 63.5mm and the H48 is 64mm, all are 1/4" bore. Confused yet? :wacko: This might help-

http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf

Which boat is this for Ray?

B)

 

[Ray Sametz]

My bad Will, the h-30 is 3/16 shaft. Need prop for 1/4 shaft. Will revise post to read h-31 or 32.

There is a BIG difference between an H31 & H32, ABC prop numbering progression doesn't always make sense. The H31 is a 68mm prop yet the H32 is a 62mm prop but the H26 is 63.5mm and the H48 is 64mm, all are 1/4" bore. Confused yet? :wacko: This might help-

<a href="http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf" target="_blank">http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf</a>

Which boat is this for Ray?

B)

I'm running a H-38 on my E hydro, wanted one size smaller in H series to try?? 1/4 bore.

 

[Don Ferrette]

My bad Will, the h-30 is 3/16 shaft. Need prop for 1/4 shaft. Will revise post to read h-31 or 32.

There is a BIG difference between an H31 & H32, ABC prop numbering progression doesn't always make sense. The H31 is a 68mm prop yet the H32 is a 62mm prop but the H26 is 63.5mm and the H48 is 64mm, all are 1/4" bore. Confused yet? :wacko: This might help-

<a href="http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf" target="_blank">http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf</a>

Which boat is this for Ray?

B)

I'm running a H-38 on my E hydro, wanted one size smaller in H series to try?? 1/4 bore.

I'll send you up one of my tweaked H32's in tomorrow's mail. B)

 

[Ray Sametz]

My bad Will, the h-30 is 3/16 shaft. Need prop for 1/4 shaft. Will revise post to read h-31 or 32.

There is a BIG difference between an H31 & H32, ABC prop numbering progression doesn't always make sense. The H31 is a 68mm prop yet the H32 is a 62mm prop but the H26 is 63.5mm and the H48 is 64mm, all are 1/4" bore. Confused yet? :wacko: This might help-

<a href="http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf" target="_blank">http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf</a>

Which boat is this for Ray?

B)

I'm running a H-38 on my E hydro, wanted one size smaller in H series to try?? 1/4 bore.

I'll send you up one of my tweaked H32's in tomorrow's mail. B)

CoooooooooL

 

[Don Ferrette]

My bad Will, the h-30 is 3/16 shaft. Need prop for 1/4 shaft. Will revise post to read h-31 or 32.

There is a BIG difference between an H31 & H32, ABC prop numbering progression doesn't always make sense. The H31 is a 68mm prop yet the H32 is a 62mm prop but the H26 is 63.5mm and the H48 is 64mm, all are 1/4" bore. Confused yet? :wacko: This might help-

<a href="http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf" target="_blank">http://www.abcprops.com/proppdf/PROPSHEET(1104).pdf</a>

Which boat is this for Ray?

B)

I'm running a H-38 on my E hydro, wanted one size smaller in H series to try?? 1/4 bore.

I'll send you up one of my tweaked H32's in tomorrow's mail. B)

CoooooooooL

Well did you run it yet??

 

[Ray Sametz]

No, ran Sport 40 & 40 hydro, maybe Sunday. The weather going to sh*t the next couple of days. You getting out this weekend???? 8 days and counting!!!!

 

[Don Ferrette]

No, ran Sport 40 & 40 hydro, maybe Sunday. The weather going to sh*t the next couple of days. You getting out this weekend???? 8 days and counting!!!!

Doubt it. Thunderstorms & wind this weekend. :angry: