WTB bearings for Picco silverhead exr 45's.

[NITROSNIFER]

Where's the best place to source bearings for these motors. Needs 5 sets they are 28.00mmx12mmx8.00mm and 19.00mmx7.0mmx6.00mm

 

[dave roach]

Give Bruce Jacobs a call.Bruce is on this fourm.Bruce carriers bearings.

Dave Roach

 

[AFIRacing]

You have PM Kevin

Steve H.

 

[Bruce Jacobs]

I have up to 10 sets of bearings for all nitro motors used in boats for the last 5 years, They are from Boca, which is a company, not a brand of bearing. We run them in all of our motors and have not had a failure with a bearing that was the fault of the properly installed bearing. I have had failures, but all attributed to misuse of the bearing. So, if you want an inexpensive bearing, that works as well as any properly installed, maintained bearing out there, let me know. I also have the stock OEM bearings for all current CMB motors.

 

[Joe Warren]

Where's the best place to source bearings for these motors. Needs 5 sets they are 28.00mmx12mmx8.00mm and 19.00mmx7.0mmx6.00mm

www.bocabearings.com

 

[Grimracer]

Front

Rear

Might be an option

Grim