(wanted) Picco 45 & 67 EXR Wrist Pins

[Joe Wiebelhaus]

Looking for wrist pins for the Picco 45 & 67 EXR engines.

Does anyone know of another manufacturer that has the same OD for either engine ?

changing the length is not a problem.

B)

 

[Mike Byer]

I have a couple new old cmb pins one is .276x.945 the other is .235x.887

 

[Ray Sametz]

Picco Silverhead 45 EXR pin is .196 OD X .728Lg. Don't have any extras. Ray

 

[John Knight]

Joe,

Just finished some measuring and fitting. The CMB CAM 45 (purple) wrist pins are the exact dia (OD) as the Picco blkhead. However, they are about .75MM too long, and as you noted, it can be cut off. I fitted them into a blkhead rod and piston and fit perfect in OD.

Can't help with the 67.

 

[Joe Wiebelhaus]

Joe,
Just finished some measuring and fitting. The CMB CAM 45 (purple) wrist pins are the exact dia (OD) as the Picco blkhead. However, they are about .75MM too long, and as you noted, it can be cut off. I fitted them into a blkhead rod and piston and fit perfect in OD.

Can't help with the 67.

Thanks John,

That is what I was looking for..........

jw

 

[waltr]

And thanks to both of you guys.

Joe,

I was going to ask the same question, but you beat me to it.I need a couple of new ones myself to go with the new rods you sent to me.

Thanks!!

 

[John Knight]

Forgot to note the pin dia is .196.