Wanted crankcase for K&B 7.5

[jon c]

I am looking for a good usable crankcase or case's for a 7.5 K&B outboard, I need the case for a 8702 model, the one that takes the 17mm. If you have one you can part with, you can pm me or e-mail me at [email protected]. Thank you for your time!!!

 

[jon c]

I am looking for a good usable crankcase or case's for a 7.5 K&B outboard, I need the case for a 8702 model, the one that takes the 17mm. If you have one you can part with, you can pm me or e-mail me at [email protected]. Thank you for your time!!!

bump

 

[Foolwitools]

Hi Jon,

I have a 7.5 case that had 2 stripped head screws.... I tapped them out to 6/32 to get by for a while. It worked fine, but I replaced the case anyhow.

I'm not sure if it was an 8701 or 8702. If you want, I'll mail it to you and if it works, mail me $5.

Bob the Fool :blink:

 

[tnrcboatracer]

I can put in 4-40 helicoils if you you would rather have the correct screws. Tapping 6-32 will also require opening up the the holes and counterbores in the head cap.

 

[jon c]

I can put in 4-40 helicoils if you you would rather have the correct screws. Tapping 6-32 will also require opening up the the holes and counterbores in the head cap.

thanks guys for the replies!!! i've got a couple of case's now