- Joined
- Nov 26, 2005
- Messages
- 1,959
Son has been making these pieces for awhile and others have asked for them so we thought we would see if there is interest.
They are used in thru hull exhaust outlet applications. Sure, you can drill a hole in the transom and stick a 7/16 brass extension on your pipe and it works, BUT why not have a nice clean and trick look. Remember, each is made individual so specs shown in detail are close.
First set of pictures shows use with 1/2 inch hose OVER piece.
Second set of pictures shows use with 7/16 brass tube inside fit. Your preference. Part can be used either way.
Overall length...1 1/8 inch to 1 1/4
Outlet flange...3/4 inch OD
Thru hull 11/16 INCH OD
Piece ID 1/2 INCH
May be purchased here.....http://www.allrc1.com/#!product/prd1/4496529651/thru-hull-exhaust-fitting-and-mount
Stock very limited but we'll add as interest is shown.
$18.95 plus shipping on checkout by PayPal.
They are used in thru hull exhaust outlet applications. Sure, you can drill a hole in the transom and stick a 7/16 brass extension on your pipe and it works, BUT why not have a nice clean and trick look. Remember, each is made individual so specs shown in detail are close.
First set of pictures shows use with 1/2 inch hose OVER piece.
Second set of pictures shows use with 7/16 brass tube inside fit. Your preference. Part can be used either way.
Overall length...1 1/8 inch to 1 1/4
Outlet flange...3/4 inch OD
Thru hull 11/16 INCH OD
Piece ID 1/2 INCH
May be purchased here.....http://www.allrc1.com/#!product/prd1/4496529651/thru-hull-exhaust-fitting-and-mount
Stock very limited but we'll add as interest is shown.
$18.95 plus shipping on checkout by PayPal.
