Synth to mix fuel

[carlocardinale]

Hi
any suggestion, on your experience, of synth lube besides kl from klotz to mix with castor??
tks

 

[Terry Keeley]

Morgan's been working for me. I run 8% + 4% castor once the motor is properly broken in.

 

[carlocardinale]

Tks Terry, but i need an oil available in europe, no one use kart oil??

 

[Mike Hughes]

Maybe it would help if you mention what you do have access to. I tried to mix some redline with nitro without success. Works fine on gasoline.
Mike

 

[Jeff Lutz]

Tks Terry, but i need an oil available in europe, no one use kart oil??

Are you sure that Cool Power Morgan fuels won’t ship oil to Europe ? I’m not sure if Europe will let it in or not but I bet Morgan would ship it. Also, have you tried the Elkalub CMB recommends ?

 

[Terry Keeley]

https://www.driftshop.com/motul-micro-2-stroke-rc-vehicle-oil-2l.html

 

[DON MAHER]

Maybe it would help if you mention what you do have access to. I tried to mix some redline with nitro without success. Works fine on gasoline.
Mike

Mike, Redline makes a oil specifically for nitro!

 

[Buckshot]

Hi
any suggestion, on your experience, of synth lube besides kl from klotz to mix with castor??
tks

Elkalub, owned by R/C racers in Germany.

 

[Andrea Kalina]

I looked into this some about a year ago. If I remember right, the Polyol Ester formulation of something like "Red Line Alcohol Fuel Two-Cycle Premix" oil may offer some performance advantages over the Polyalkylene Glycol formulation I want to say Klotz uses. Again, it's been a year since I last looked into this (and I don't have my notes with me right now), so I might be a little fuzzy on what I learned. My advise: find the MSDS and SDS for each oil, look at what the main constituent is, and confirm if that constituent offers the performance benefits you're after.

 

[Wasted wages]

POE & PAG....both basically synthetic refrigeration oils.

Both are very hydroscopic..

 

[Shannon Muth]

What Don Maher said!!

 

[carlocardinale]

Mike, Redline makes a oil specifically for nitro!

Hi DON sorry for delay, you use Redline oil in your engines plus Castor oil???

 

[Koban Rado]

Hi
any suggestion, on your experience, of synth lube besides kl from klotz to mix with castor??
tks

Contact company ELKALUB, family Hof. the three sons are very successful boat racers.
They produce several types of modeling oils, with different castor content
MEO150, MEO200,...(70:30, 50:50, ....)

https://www.facebook.com/Elkalub-Racing-Team-1921234477999429

 

[carlocardinale]

Contact company ELKALUB, family Hof. the three sons are very successful boat racers.
They produce several types of modeling oils, with different castor content
MEO150, MEO200,...(70:30, 50:50, ....)

https://www.facebook.com/Elkalub-Racing-Team-1921234477999429

TKS RADO
MEO150 IS 70 SINTH 30 CASTOR??

 

[Timbo Whalen]

Maybe it would help if you mention what you do have access to. I tried to mix some redline with nitro without success. Works fine on gasoline.
Mike

Redline DID offer a nitro/methanol friendly formula.... #40504

https://www.amazon.com/Red-Line-40504-Two-Cycle-Alcohol/dp/B0053O9E9G?th=1

 

[Koban Rado]

TKS RADO
MEO150 IS 70 SINTH 30 CASTOR??

Meo 200 50% castor 50% synthetic MEO 150 70% castor 30% synthetic
ELKALUB MEO 150 Advanced is mainly recommended for smaller engine sizes below 7.5cc.
ELKALUB MEO 200 is mainly recommended for larger engine sizes above 7.5cc.

 

[DON MAHER]

Hi DON sorry for delay, you use Redline oil in your engines plus Castor oil???

Yes, Redline oil! But no Castor! 16oz. per gal. Never have had a oil related failure!

 

[Timbo Whalen]

Yes, Redline oil! But no Castor! 16oz. per gal. Never have had a oil related failure!

I've used the Redline Racing 2 stroke in my drag sleds and Merc V6 race outboards with
excellent results, and never had any kind of failure.

Talked to a guy at Redline 4-5 yrs. back about their methanol/nitro formula and he said they were
tweaking the recipe. Still, have never gotten around to using it.

Right now, using KL-198 TechniPlate Lite at 20%, no castor, in all my engines. Definitely cleaner, no
sign of excessive heat, and the engines seem to spin higher than on KL-200 with added castor.
Do want to try the Redline #40504 eventually.

 

[carlocardinale]

Yes, Redline oil! But no Castor! 16oz. per gal. Never have had a oil related failure!

do you now is possible add a little quantity of castor????
like 6%synth & 3% castor for total of 9%
TKS again

 

[DON MAHER]

Sorry l don’t know if castor will mix with redline. I have never tried!