Tony Jacuzzi
Well-Known Member
- Joined
- Jun 26, 2002
- Messages
- 1,798
This boat is a rebuild of an older hull that I just do not have time to deal with. It needs to be trimmed out to find proper setup. The turn fin transom has been re-drilled, filled and retapped and needs to be painted, due to me improperly re-setting the turn fin location. This hull comes with:
Speedmaster Rudder
Speedmaster strut
Speedmaster motor mount lowered, drilled and tapped for P45
Dick Tyndall Virginia Craftsmen turn fin
A mixture of Hitec steering, JR throttle, and Futaba 3rd Channel servos with aluminum arms on throttle and steering
$350.00 plus shipping. contact me at [email protected]
pictures and history can be viewed at https://www.intlwaters.com/gallery/displayimage...album=543&pos=0
This boat has not been trimmed and will need set up work !!
Speedmaster Rudder
Speedmaster strut
Speedmaster motor mount lowered, drilled and tapped for P45
Dick Tyndall Virginia Craftsmen turn fin
A mixture of Hitec steering, JR throttle, and Futaba 3rd Channel servos with aluminum arms on throttle and steering
$350.00 plus shipping. contact me at [email protected]
pictures and history can be viewed at https://www.intlwaters.com/gallery/displayimage...album=543&pos=0
This boat has not been trimmed and will need set up work !!
Last edited by a moderator:
