SOLD - 45 Seaducer with Blackhead Picco

[Tony Jacuzzi]

[SIZE=14pt]45 Seaducer Mono – [/SIZE][SIZE=11pt]45 Carbon/Kevlar Seaducer equipped with Hitec HS85 MG on throttle and 3rd channel (OS inflight mounted to Aeromarine needle block).  Package includes the following:[/SIZE]

• [SIZE=11pt] Picco 8mm Blackhead with OS 40a carb and Delrin bellmouth prepped by Ron VanWagnen[/SIZE]
  
• [SIZE=11pt] Andy Brown V1 parabolic pipe, Picco header, spring and gaskets[/SIZE]
  
• [SIZE=11pt] New unused Ranjit Phelan billet piston mated to a Van Wagnen sleeve[/SIZE]
  
• (3) race props Rapedius X450/3 stock profile, Rapedius X450/3 backcut, Hildreth X450/2
  
• Miscellaneous gaskets, small parts etc.
  

$650  plus actual shipping and insurance charges ..   [email protected]

 

[Joe Warren]

 Mr. Tony  Iam interested in the Boat..... Not the engine.

 

[Tony Jacuzzi]

 Mr. Tony  Iam interested in the Boat..... Not the engine.

Thanks Joe if  the package  doesnt sell in a few days I will ping you 

 

[Joe Warren]

Yes Sir thanks!!!

 

[bzubee]

I'd be interested in the Engine Tony!

 

[MikeMischnick]

I would be interested in the pipe  (only) If available 

Mike

 

[bzubee]

I don't need the pipe.

 

[MikeMischnick]

I don't need the pipe.

Cool, Lets see what Tony decides to do. There is interest if he parts it out.

Mike

 

[Tony Jacuzzi]

Full Package reduced by 100 bucks. 

 

[ALLAN YUEN]

Hi tony. I would take it so offer $500.00 CDN dollar for all package  and will send to CALGARY AB  let me know thanks 

 

[Tony Jacuzzi]

Hi tony. I would take it so offer $500.00 CDN dollar for all package  and will send to CALGARY AB  let me know thanks 

Thanks for the offer Allan but I will pass

 

[Joe Warren]

Canada Shipping today is Just like International rates............

 

[Joe Warren]

Tony how much fit does the  in engine Piston & liner have? Average or Better than average?

 

[Tony Jacuzzi]

Joe I would say the one in the motor still has good fit  and the other Ranjit Phelan billet piston and liner  with a VanWagnen sleeve is new.  This boat has been a shelf queen for quite a while but I think its fine.  Was a pretty quick boat , likely need to change all the fuel lines etc, maybe bearings but they still  feel smooth  

 

[ALLAN YUEN]

If you sell only Picco engine with header 5 degree and list parts to me ? I don’t need mono and pipe . How much ? Let me know thanks 

 

[MikeMischnick]

I will take the pipe

Mike

 

[bzubee]

If you sell only Picco engine with header 5 degree and list parts to me ? I don’t need mono and pipe . How much ? Let me know thanks 

Allan see post #5 

 

[Tony Jacuzzi]

Mike Joe and Bill  PMS sent to all 3 of you

 

[Joe Warren]

 Tony I have sent you a PM Back.

 

[MikeMischnick]

Delete