Scale Roundnose

[ALLAN YUEN]

h34r: I wonder that repair on adjust degree L- Aluminum bracket onto the hull 0 degree or 5 degree? also what about turn fin's flat or little curve? What is your second opionion? thanks.

 

[dave weagel]

i've had good luck with these fins on my semi-scale gas rd noses :

joe petro's 47 inch gas round nose fin will work well on a 44 - 46 inch scale.

it's a 16 ga stainless curled parallelogram blade about 3.5 x 8 inches. comes finished and complete with alum angle bracket and all fasteners.

zippkits.com

also check out the machined alum curled teardrop fin at topsecretboats.com

completely finished, bracket and fasteners and excellent quality at reasonable price.

 

[SayMikey]

i've had good luck with these fins on my semi-scale gas rd noses :
joe petro's 47 inch gas round nose fin will work well on a 44 - 46 inch scale.

it's a 16 ga stainless curled parallelogram blade about 3.5 x 8 inches. comes finished and complete with alum angle bracket and all fasteners.

zippkits.com

also check out the machined alum curled teardrop fin at topsecretboats.com

completely finished, bracket and fasteners and excellent quality at reasonable price.

Many choices this is good http://www.accu-techrchardware.com/turnfins.html or a Tyndall or Hughes will also work fine

 

[ALLAN YUEN]

i've had good luck with these fins on my semi-scale gas rd noses :
joe petro's 47 inch gas round nose fin will work well on a 44 - 46 inch scale.

it's a 16 ga stainless curled parallelogram blade about 3.5 x 8 inches. comes finished and complete with alum angle bracket and all fasteners.

zippkits.com

also check out the machined alum curled teardrop fin at topsecretboats.com

completely finished, bracket and fasteners and excellent quality at reasonable price.

Many choices this is good http://www.accu-techrchardware.com/turnfins.html or a Tyndall or Hughes will also work fine

Thank for Info Allan