- Joined
- Jul 31, 2008
- Messages
- 4,176
Well, I purchased this hull with the want to build the '98-99 Appian Jeronimo or '93 Miss Rock, although it makes many other boats as well, but I just have not had the time, and do not have the funds to continue the build. This is a fully custom RC Boatcompany hull that you WILL NOT find anywhere else. Lots of extras have been done to make this hull correct. This hull kit does make a whole list of different boats, but the two above are probably some of the more popular. This is a FULL Carbon fiber hull, which is an option with RCB Co. It also has the rear tiplets shaved, it has the carbon fiber ram wing relocation kit to move the ram wing forward, it has the rear non trip extenders, it has the Appian/Ron/ Miss Von's/ etc. cowling and cockpit, windshield has been trimmed as well as the intake and exhaust in the turbine cowling and the wide front canard is also an add on extra. I also took 1.75" off the front of the sponsons as the RCB Co. hull is not correct right off the shelf to make this hull. The master hull roster dictates length, and its to long without doing that, so I did all that work too.
All of those extras made for this boat being over $800 from RCB Co. This hull comes with everything you see in the pics (I just remembered, I have the windshield as well still in the plastic wrapping, and its included!!). I started the conversion process to FE, BUT, it is simple to re-bond the radio box cover back to the hull and make this Nitro again. It is right at the point where either way is perfectly acceptable. You get the hull, cowlings, rear hatch tray, rear wing kit, etc. I already have a box to ship this in, so its ready to go. Any questions, or requests for more pics is perfectly fine, just ask. I want $650 for this plus exact shipping. East coasters, expect $35-45, west coasters, expect $75-90. You cannot get this hull from RCB Co. for anything near this price, and even if you did, you would still have to bond all the add on's yourself. This will make someone a nice hull! Post your dibs here so no one gets all ticked off please. Mike Luszcz
All of those extras made for this boat being over $800 from RCB Co. This hull comes with everything you see in the pics (I just remembered, I have the windshield as well still in the plastic wrapping, and its included!!). I started the conversion process to FE, BUT, it is simple to re-bond the radio box cover back to the hull and make this Nitro again. It is right at the point where either way is perfectly acceptable. You get the hull, cowlings, rear hatch tray, rear wing kit, etc. I already have a box to ship this in, so its ready to go. Any questions, or requests for more pics is perfectly fine, just ask. I want $650 for this plus exact shipping. East coasters, expect $35-45, west coasters, expect $75-90. You cannot get this hull from RCB Co. for anything near this price, and even if you did, you would still have to bond all the add on's yourself. This will make someone a nice hull! Post your dibs here so no one gets all ticked off please. Mike Luszcz
