Question on Boris Mazor Starter

[Robert Pickard]

What kind of connecting ends are you using on this starter i have had this starter a while now unable to use with what i was giving Thanks

 

[seaducerpete]

Mine came with bullet connectors 4mm I beleave

 

[Robert Pickard]

Thats what i have Pete but i am unable to connect with those and the connectors he gave me to the Lipo

 

[moparbarn]

then just go buy some that fit, robert. i've seen both dean's & 4mm bullets being used. mine came with 4mm bullets, i bought a pair to solder on/convert the lipo's connecters. just use what you feel comfortable with. cut, solder, plug & play.

it was good to finally meet you in brandon, hope you had a good holiday!

 

[Robert Pickard]

Robin i have the pins to go in but they are not fitting the Lipo he suggests

 

[moparbarn]

Then swap either the lipo connectors to match the starter or swap the starter connectors to match the lipo. Or swap all of 'em to some you like. OR, send it to me.....LOL!!

 

[Robert Pickard]

I be seeing Mic in a couple weeks i take it with me he is our electric Guru

 

[moparbarn]

Jeez Robert, it's just swapping connectors - hardly "guru" level stuff. Better play it safe & ship it up here to the blue ridge before you hurt yourself with all that voltage. ROFLMAO!!!!

 

[Robert Pickard]

the connectors i was given to swap out dont work maybe if i get another Lipo

 

[moparbarn]

Just get an entire set that will carry the load, if you can't match up something to either the starter or the lipo. Deans connectors will work, & are easy to find. Can't plug 'em backwards though, something to consider on your outboards. For that you will need bullets. Stop worrying about matching what you have, just get an entire set - done!