- Joined
- Jan 9, 2023
- Messages
- 519
What is a good prop to start on a 39-inch mono hull with a pico 67 surface drive ? two or 3 blade ? thanks
Yeh what hullDepends what hull I run 3 blade on my Seaducer
Yeh what hull
Not familiar with hydro sport marine.Hydro Sport Marine 39 inch
I'm not familiar with that hull either start off with x 455 2 blade get a good needle then step up from there just my opinion
Not familiar with hydro sport marine.
67 in that boat, x460 2 or 3 blade
Not familiar with hydro sport marine.
67 in that boat, x460 2 or 3 blade
thanksX460/3
thanksTry 457/3 if it’s real hot out with lots of humidity the 460 might be hard to pull
i just bought this prop to try X460/3 cut to 57mmTry 457/3 if it’s real hot out with lots of humidity the 460 might be hard to pull
Hey Panama Bruce,We ran a picco 67 was one of Wyatt’s engine was in a rigger we put it in a sprint cat was a great combo mostly used 457 460 and Prather 255 260 2 blades was a fuel hog 20 oz and had to launch it late and stay out of throttle at mill
For testing I wouldn’t worry about it the picco we had was highly modified the carb it had on it when I first got the motor was opened up so much it wouldn’t choke off I finally got a smaller bore and still ran great.so you think i need a 24oz tank ?
Enter your email address to join: