• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

proboat project hull with engine

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

toyotatruckin

Well-Known Member
Joined
Jun 5, 2006
Messages
1,068
have to look around to see what all is going with it-- modified hull ,engine, flywheel,collet for 150 flex, and 2 different sets of engine mounts are for sure going---also have 2 pieces of solder tin and i believe i have the brass tube to make yourself a tank for it,, servos ill also have to see what i have....get some pics later... and a price after i see what all goes......Im 100% done with nitro wont pay the price for the fuel. not worth it to me
 
here are a couple pictures

100_1583.jpg


100_1584.jpg


100_1585.jpg
 
Is the hull set up for the version 1 or 2 hardware? what size engine is included? does it have a cowling? Price?
 
engine is a .18 hpi evo with a car flywheel and octura .150 collet the collet is plenty heavy enough to make up the weight of th flywheel---the hull is custom now and its not set-up for any special hardware use what you want stuffing tube needs to be installed still old junk is gone .. transom wood was replaced with an aluminum plate on the inside of the hull NO COWL and the proboat cowl WILL NOT FIT ON THIS HULL ANYMORE I built it to run open notice---rear cowl mounting holes gone no dip in the side for the cowling to sit in anymore also the rear end has been shaved inside of the front end wood seams were ground out and glassed also the cock. pit area re-enforced etc... as far as proboat goes its not anymore lol price i havent figured up yet

side note----i know atleast one 5 cell pack is good the other 2 need cycled and checked out
 
Last edited by a moderator:
175$ for the lot shipped in the lower 48 shoot make me an offer this is the last of anything nitro i have and want the space on my bench
 
Last edited by a moderator:
LOL quit nitro once to jump into gas and quickly found that every boat i built was $1200+ sold out to come back to nitro and POOF fuel shot up local refuse to spend the cash for it--killed that end of the hobby for me---Might build a nitro or gas hull or two to resell or for someone but im already a couple feet in the electric door.
 
Back
Top