Powerhead for K&B lower

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joern Markset

Well-Known Member
Supporting Member
Vendor
Joined
Oct 25, 2004
Messages
1,150
What options do we have that will fit a K&B lower?
I know of a few, but guess there is a lot more brands that offer powerheads based on the K&B bolt pattern
 
What options do we have that will fit a K&B lower?

I know of a few, but guess there is a lot more brands that offer powerheads based on the K&B bolt pattern
Joern,

Novarossi Marine USA carries both the 7.5 and 3.5 outboard powerheads that will fit the K&B, Hyperperformance, OS, and Lawless lower units.
 
Last edited by a moderator:
What options do we have that will fit a K&B lower?

I know of a few, but guess there is a lot more brands that offer powerheads based on the K&B bolt pattern
67 outboard with a Ernie Laflaur bell housing. I also have a 45 setup the same for a 45 engine as well
 
Last edited by a moderator:
Looks interesting, where can I find the Ernie Laflaur bell housing? Anyone who knows?
There not made anymore. So if someone has it and want to let it go is the only way. I have (1) for a 67 tunnel and (2) for a 45 setup but there not for sale. There very rare now
 
Last edited by a moderator:
Looks interesting, where can I find the Ernie Laflaur bell housing? Anyone who knows?
There not made anymore. So if someone has it and want to let it go is the only way. I have (1) for a 67 tunnel and (2) for a 45 setup but there not for sale. There very rare now
Ok, then I have to make some my self. I thought about it years ago to make a CMB 91 fit on VP lower. Now it seems to be the right time to do something about it ;-)
 
Last edited by a moderator:
Looks interesting, where can I find the Ernie Laflaur bell housing? Anyone who knows?
Joern
I make them for the 45 cmb's & working on one for the old gold head cmb's.

They include: drive nut for square shafts, header adapter & bell housing.. $200+ S&H.

CONTACT;

ALAN ELZER

BAM RACING PRODUCTS

([email protected])

Sent from my SAMSUNG-SM-N900A using Tapatalk
 
Looks interesting, where can I find the Ernie Laflaur bell housing? Anyone who knows?
Joern
I make them for the 45 cmb's & working on one for the old gold head cmb's.

They include: drive nut for square shafts, header adapter & bell housing.. $200+ S&H.

CONTACT;

ALAN ELZER

BAM RACING PRODUCTS

([email protected])

Sent from my SAMSUNG-SM-N900A using Tapatalk
Well if you do there is no reason to start making something else.

Just want to make sure it fit the 45RS and 45RS EVO, I`m currently running the EVO engines but I do have some of the previous RS as well.

I`ll send you an e-mail
default_smile.png


45 1.jpg45 rs direct.jpg
 
Last edited by a moderator:
I allready have both of these engines, Ron.

And I got Rossi, CMB, OPS, OS and K&B as well. Now waiting for the RS45 and RS45EVO bellhousing.

Looking forward for the ice to melt (will take a couple of months though)
 
I allready have both of these engines, Ron.

And I got Rossi, CMB, OPS, OS and K&B as well. Now waiting for the RS45 and RS45EVO bellhousing.

Looking forward for the ice to melt (will take a couple of months though)
Yes. The rest of us will be ready for the warm weather to return again as well, and get us out of this Winter weather soon!!!
 
Back
Top