• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Picco and misc parts for sale

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

piper_chuck

Well-Known Member
Joined
May 25, 2005
Messages
2,436
A fellow club member gave me some stuff to sell. Unless otherwise noted, all is new in package. I just want to get this stuff to someone who can use it, so I'm willing to sell the whole lot, or individually. To keep things fair, post with offers.

Aeromarine engine mount CMB 45 5" $20

Unknown engine mount, looks like .45 or .60. I can provide more details. $20)

Picco

5067 gasket

5006 gasket

5062 gasket (2) (sold)

5024 gasket (marked .45) (sold)

2087 head shim

2088 head shim (2)

2121 head button (sold)

2020 o ring (3)

2038 o ring (3) plus three not in package (sold)

2054 o ring (3) plus two not in package (sold)

???? header gasket (2) (one marked 67 EXR, second appears to be the same) (sold)

7077 header gasket

???? header spring

Carb, unknown size 16mm od, 11mm id, not new (sold)

Boca Bearings kit ENK79HS (Picco .45) (sold)

OPS spring 3269 (5)

OPS header gasket OP 0412

Novarossi spring 60001 (sold)

Novarossi header gasket 21000 (pkg of 5) (sold)

OS needle arm 71703319

OS Thermo-insulator 22884950 (for 21ex, 21 rx-m)

OS gasket set (marked OS .46)
 
Last edited by a moderator:
Chuck,

I'll take the following if not already taken:

5062 gaskets

5024 gaskets

2121 head

2038 O rings

2054 O rings

NR header gaskets

NR spring

Let me know the prices and if you want Paypal. Thanks.

John
 
Last edited by a moderator:
Chuck, If the bearings ENK79HS are still for sale. Let me know what the price is. Time to start putting bullets togather again.

Mark
 
Hi Chuck,

I'll would like to buy the following if not already taken:

???? header gasket (2) (one marked 67 EXR, second appears to be the same)

Carb, unknown size 16mm od, 11mm id, not new

If the bearings ENK79HS become available I would be interested in those as well.

Let me know the prices and if you want Paypal. Thanks.

Chris Capaldi

[email protected]
 
Last edited by a moderator:
To all who have replied, thanks. I'll send you some prices in the morning, just got home from our annual club dinner, need some sleep.
 
;) I am interested in the motor mounts,are they for rubber isolators and have they been drilled for a motor.

thanks

GavinP

A fellow club member gave me some stuff to sell. Unless otherwise noted, all is new in package. I just want to get this stuff to someone who can use it, so I'm willing to sell the whole lot, or individually. To keep things fair, post with offers.

Aeromarine engine mount CMB 45 5" $20

Unknown engine mount, looks like .45 or .60. I can provide more details. $20)

Picco

5067 gasket

5006 gasket

5062 gasket (2)

5024 gasket (marked .45)

2087 head shim

2088 head shim (2)

2121 head button

2020 o ring (3)

2038 o ring (3) plus three not in package

2054 o ring (3) plus two not in package

???? header gasket (2) (one marked 67 EXR, second appears to be the same)

7077 header gasket

???? header spring

Carb, unknown size 16mm od, 11mm id, not new

Boca Bearings kit ENK79HS (Picco .45)

OPS spring 3269 (5)

OPS header gasket OP 0412

Novarossi spring 60001

Novarossi header gasket 21000 (pkg of 5)

OS needle arm 71703319

OS Thermo-insulator 22884950 (for 21ex, 21 rx-m)

OS gasket set (marked OS .46)
 
;) I am interested in the motor mounts,are they for rubber isolators and have they been drilled for a motor.

thanks

GavinP
Yes, the mounts are drilled. The Aeromarine set is marked CMB .45. The other set has 5" Picco engraved on them and is drilled. I don't know what size Picco they were drilled for. The holes are 24mm on center.
 
:rolleyes: I am interested in the mount for the Picco.24mm is about the size for one of my 10cc Picco's.I do use the Aeromarine mounts but would need room on the mounting plates for the motor to drill and tap for the 24mm size of the Picco.

Gavin

;) I am interested in the motor mounts,are they for rubber isolators and have they been drilled for a motor.

thanks

GavinP
Yes, the mounts are drilled. The Aeromarine set is marked CMB .45. The other set has 5" Picco engraved on them and is drilled. I don't know what size Picco they were drilled for. The holes are 24mm on center.
 
:blink: Can you please send me a pic of the other mount.

[email protected]

:rolleyes: I am interested in the mount for the Picco.24mm is about the size for one of my 10cc Picco's.I do use the Aeromarine mounts but would need room on the mounting plates for the motor to drill and tap for the 24mm size of the Picco.

Gavin

;) I am interested in the motor mounts,are they for rubber isolators and have they been drilled for a motor.

thanks

GavinP
Yes, the mounts are drilled. The Aeromarine set is marked CMB .45. The other set has 5" Picco engraved on them and is drilled. I don't know what size Picco they were drilled for. The holes are 24mm on center.
 
;) I am interested in the Aeromarine mount with the Picco etched on it.Can you please give me a total cost including p/p.Do you take Paypal?otherwise I can arrange a Bank Cheque/Money order first thing Monday.

regards

GavinP

:blink: Can you please send me a pic of the other mount.

[email protected]

:rolleyes: I am interested in the mount for the Picco.24mm is about the size for one of my 10cc Picco's.I do use the Aeromarine mounts but would need room on the mounting plates for the motor to drill and tap for the 24mm size of the Picco.

Gavin

;) I am interested in the motor mounts,are they for rubber isolators and have they been drilled for a motor.

thanks

GavinP
Yes, the mounts are drilled. The Aeromarine set is marked CMB .45. The other set has 5" Picco engraved on them and is drilled. I don't know what size Picco they were drilled for. The holes are 24mm on center.
 
:rolleyes:

I will take the mount with the "Picco" etched on it.Please advice total cost including P/P and do you take PayPal.

GavinP
 
Back
Top