OS needle plastic arm

[WikiWiki1]

I thought I read a thread once talking about an aluminum arm for the OS inflight needle but I can't seem to find it by searching. Anyone know if one is available somewhere?

Thanks, Brent

 

[shoboat]

Brent,

We are making some up for the 3rd channel needle that goes on the carb.

Is this what you are refering to? The plastic one just bends and then you don't get

a good needle adjustment.

Thanks,

Mark Sholund

 

[Don Ferrette]

We are making some up for the 3rd channel needle that goes on the carb.

Mark are these going to be exact duplicates including the index notches?

 

[shoboat]

Don,

I believe so, I will have to look and see what I sent to the machine shop.

Are you interested if they are the right ones?

I Will Let You Know,

Mark Sholund

 

[WikiWiki1]

Mark, I would be interested in one. Mine is on an OS 9B carburetor.

Brent

 

[Don Ferrette]

Don,

I believe so, I will have to look and see what I sent to the machine shop.

Are you interested if they are the right ones?

I Will Let You Know,

Mark Sholund

If they are exact dupes I'd been interested in alot more than one.

 

[waltr]

Mark,

I would also be interested in a few if the're the same.

 

[tracerbob]

Same here

 

[nitro_nemesis]

I wouldn't mind a couple !!!

 

[Don Ferrette]

Don,

I believe so, I will have to look and see what I sent to the machine shop.

Are you interested if they are the right ones?

I Will Let You Know,

Mark Sholund

Mark, what did you find out & what is estimated timeframe? B)

 

[shoboat]

Don & Others,

They are going to be just like the plastic one with the notches. They are being made, I will know

a time frame next week. Don how many are you thinking about?

Thanks,

Mark Sholund

 

[Don Ferrette]

Don & Others,

They are going to be just like the plastic one with the notches. They are being made, I will know

a time frame next week. Don how many are you thinking about?

Thanks,

Mark Sholund

At least dozen if they're priced right.

 

[WikiWiki1]

Mark, are these arms going to be available?

Thanks, Brent

 

[Don Ferrette]

Bump! B)

 

[Don Ferrette]

Another bump. Whazzup with this Mark?

 

[shoboat]

Don,

What's up ^,is we need to find the right broach so we can get the notches in the arm correctly.

If anyone has one,(broach) let me know please. They are going to cost aprox. $10.00 each,

as they take a little bit of time to make.

Thanks,

Mark Sholund