• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

OPS engines 67, 45 and lot of parts

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Marc Pagé

Well-Known Member
Joined
Dec 26, 2003
Messages
109
I have a lot of new and used OPS stock to offer!

SOLD ! 1 used OPS 0.67 Super Red Head (drum edition) with carb, angled exhaust adaptor, exhaust cooler adaptor, alluminium flywheel in good condition, very tight, in the original box. Price: 200 $

1 OPS 0.45 New in the box! never seen fuel or boat, (disk edition) with angled exhaust adaptor, alluminium flywheel, exhaust silicon adaptor, carburator, spare shim, with straight shaft connector male and female,in the original box. Price : 240$

1 OPS 0.45 almost new (drum edition) with new bearings, new piston sleeve, flywheel, carburator, new angled exhaust adaptor. The carb retainer is missing. The head of this engine has been modified a little bit, it has a little hole on top for the water to come out instead of using the water inlet. The hole of one water inlet was patch with a little screw. In the original box. Price : 175$ SOLD

1 OPS 0.45 (disk edition) used, with angled exhaust adaptor, carburator, flywheel, male and female straight shaft connector, with very tight piston sleeve. In the original box. Price : 150$ SOLD

And the OPS 0.67 parts: SOLD!

3 crank case, 2 almost new and one with little used

2 flywheel, 1 alluminium and one Gold edition, good shape

1 piston retainer (pin) (used)

3 sleeve with very little used

1 red head with 2 water inlets (used)

1 crank shaft with little used

4 new in the bag connecting rod

1 used connecting rod

1 front plate with only the small bearing but new

1 backplate with disk installed (almost new)

1 new in the bag disk plate

1 nitro head with little used

All these parts cannot be sold seperately, the price for all these parts is : 250 $

I'll also offer a special price if someone would like all the kit (engines and parts). Price : 800$

I'll accept paypal and i can take some pics if someone need it!

I'm also a ebay member with over 150 transactions and 100 % positive feedback. You can check it all with my ebay name: foreverdale3winner

The shipping cost to USA and Canada will be FREE!

Thank's :D
 
Last edited by a moderator:
Other items :)

For OPS 0.45: SOLD! SOLD!

1 new in the bag front plate with two new bearings #40910.

1 new in the bag front plate alone #40910.

1 back plate for the carb new in the bag.

1 disk new in the bag #4680.

2 new in the bag sets of bearings #3980

1 new in the bag carb retainer (screw with nut) #6600

1 used carb retainer

1 used pin for the disk

1 used flywheel

1 used crankshaft

1 straight exhaust adaptor

1 little used front plate with 2 bearings

The whole lot for : 100$

Shipping for USA and Canada will be FREE :D
 
Last edited by a moderator:
Back
Top