Darin Jordan
Well-Known Member
- Joined
- Mar 11, 2005
- Messages
- 1,821
Time for me to move on from things not being used.
This is a ONE of a Kind, very unique and special, OPC Tunnel hull that was the last hull built by Tommy Lee, with the help of Rod Geraghty.
I ran it for a season in P-OPC, but put it on the shelf when I started working with my Stiletto.
Hull has been fully converted to FE, but could be easily converted back to Nitro if desired.
Worked OK with P-Limited power and was pretty fast. I think it might be better suited for "Mod" power with a 1515 or similiar motor. Has TONS of room in the battery compartment for batteries and ESC. Hull is 30" Long.
Cowl is glass, hull is wood. Battery and radio compartment covers are made from G10. I added a "hump" in the battery box cover to make a little more room for an ESC on top of the 4S pack.
Transom is plywood laminated with carbon fiber plate, and is drilled for either a Lawless 3.5, or a Hyperformance Bullet Drive. I'd recommend the Lawless, if you can afford one. I'll include the steering wheel for the servo as well.
Need to free up a little more room in the garage, and I'm not one to just store things just because, so let's get this one of a kind treasure to a good home.
(by the way, the stickers will peel right off )
$275.00 shipped in the USA
Thanks for looking.
This is a ONE of a Kind, very unique and special, OPC Tunnel hull that was the last hull built by Tommy Lee, with the help of Rod Geraghty.
I ran it for a season in P-OPC, but put it on the shelf when I started working with my Stiletto.
Hull has been fully converted to FE, but could be easily converted back to Nitro if desired.
Worked OK with P-Limited power and was pretty fast. I think it might be better suited for "Mod" power with a 1515 or similiar motor. Has TONS of room in the battery compartment for batteries and ESC. Hull is 30" Long.
Cowl is glass, hull is wood. Battery and radio compartment covers are made from G10. I added a "hump" in the battery box cover to make a little more room for an ESC on top of the 4S pack.
Transom is plywood laminated with carbon fiber plate, and is drilled for either a Lawless 3.5, or a Hyperformance Bullet Drive. I'd recommend the Lawless, if you can afford one. I'll include the steering wheel for the servo as well.
Need to free up a little more room in the garage, and I'm not one to just store things just because, so let's get this one of a kind treasure to a good home.
(by the way, the stickers will peel right off )
$275.00 shipped in the USA
Thanks for looking.