ONE MO TIME

[dwilfong]

Well here we go again.......................LOL

Going to run my VAC 1.05 again in a old SG Eagle that belongs to my buddy Luis Ayala.

The eng dropped right in place with gust a motor mount swap from my newer SGX.

Will give it a spin here soon. may be this week end if the weather holds out.

Will be a great test bead for the new ABC props.

O and this is all Julian's fault with that fancy smancy CF twin rigger.............

Can't let him get to head strong..................LOL

 

[ALLAN YUEN]

Look mark black putty or hole your case???

 

[dwilfong]

That's where the rod came out last time................................

Filled with Devcon liquid aluminum epoxy.

 

[julianconde]

Well here we go again.......................LOL

Going to run my VAC 1.05 again in a old SG Eagle that belongs to my buddy Luis Ayala.

The eng dropped right in place with gust a motor mount swap from my newer SGX.

Will give it a spin here soon. may be this week end if the weather holds out.

Will be a great test bead for the new ABC props.

O and this is all Julian's fault with that fancy smancy CF twin rigger.............

Can't let him get to head strong..................LOL

Don't blame me because you got nitro fever all the sudden. The truth is you got exited working on my boats.

Julian

 

[mercguy]

David

Good luck with this one. Is that an Andy pipe?

Bill Hoch

 

[dwilfong]

Bill

No it is a pipe I had put together from parts Scott Bouchie made. Then had Tom Foly weld it up for me.

Andy helped me understand what was what. It is a design similar to his 67 fat belly pipe but larger.

 

[the german]

Bill

No it is a pipe I had put together from parts Scott Bouchie made. Then had Tom Foly weld it up for me.

Andy helped me understand what was what. It is a design similar to his 67 fat belly pipe but larger.

My opinion

Best pipe you can get on the market.

Just saying

 

[dwilfong]

This pipe gives extra power when in tight on the corners and pulls off the turn like a fright train....................................

Just have to have some prop so you don't go rich and will pull the whole length of the straits.

 

[dwilfong]

OK she is ready lets burn some NITRO............................

 

[dwilfong]

Well that went just as planed.........................

3 tank just got some needle and hit a buoy......................I know I know..........

Well the transom was pulling out after the second run and the boat got a mind of its own.............................

Good thing the eng is broke in and ready to rock for the next time.

Next year it will be in new SGX........................

Back to the real boat for now.

I can tell you this much the ABC 2717 /38 /19 is a drop on prop for a .91/1.01 just S/B......................................

The newest ones have a much smaller cup than the first one I got my hands on.

Julian's twin and Raul's twin both popped right up on them after a little strut adjustment and ran like stink................................

The SG ran this prop also with no problem just a little angle in the strut.

Boat set up dose not have to change with this prop just small adjustment with the strut will bring the boat right in.