NYLOIL ?

[Marc Pagé]

Is it a good idea to use a NYLOIL bushing in a outboard propshaft to replace the old one?

Does someone ever try these? Are they better than oillite?

Thank's!

 

[Marc Pagé]

I found this information!

PROPERTY UNITS TEST METHOD NYCAST® NYLOIL®-FG

Specific Gravity - ASTM D792 1.14 - 1.15

Tensile Strength psi ASTM D638 9,500 - 11,000

Tensile Elongation % ASTM D638 35 - 55

Tensile Modulus psi ASTM D638 375,000 - 475,000

Compressive Strength

(at 10% offset) psi ASTM D695 12,000 - 14,000

Compressive Modulus psi ASTM D695 275,000 - 375,000

Flexural Strength psi ASTM D790 14,000 - 16,000

Flexural Modulus psi ASTM D790 375,000 - 475,000

Shear Strength psi ASTM D732 8,000 - 9,000

Notched Izod Impact ft. lbs./in ASTM D256 1.4 - 1.8

Tensile Impact ft. lbs./in2 ASTM D1822 33 - 36

Hardness, Rockwell R ASTM D785 100 - 115

Hardness, Shore D ASTM D2240 74 - 80

Melting Point deg F ASTM D789 450 ± 10

Coef of Linear Thermal Exp.

in./in./deg F ASTM D696 5.0 x 10-5

Deformation under Load (122 deg F, 2000 psi)

% ASTM D621 0.7 -0.8

Intermittent Service Temp.

deg F - 330

Water Absorption

24 Hours % ASTM D570 0.5 - 0.6

Coefficient of Friction

Static - 0.19 - 0.22