New Mini Strut and Mini Rudder from CMDi

[Andy Brown]

New Mini Strut from CMDi Only $24.95

-Strut has .250" bore

-Very stable mounting bracket (4 screws to Transom, 2 screws to lock strut)

-Screws are 4-40 Stainless w/ Locknuts

- Back of strut is counter sunk for bullet nose drive dogs (also availible from CMDi)

- For .12 thur .28 powered boats

-For light weight mounting on .12 Nitros or small FE's one bracket half can be used.

Contact CMDi at [email protected] or call 386-208-1036.

Ph. hours are 12 noon till 5 PM EST

We also have a few .150" cables with .187" stub in stock.

Also .187" X .312" bullet nose drive dogs.

New CMDi Mini Rudder coming soon. Price TBA

Pictured below.

-Has 1/8" pivot pin

-2-56 brass screw for blade brake-away

-Bracket is .800" tall, mounts with 4-40 screws

-Set back is 1.1" from transom to pivot pin

-tiller arm machined as one peice with pivot bracket

-Will work on Left or right side of hull

Sorry parts where not cleaned up for this Photo!

 

[jefffro007]

New Mini Strut from CMDi Only $19.95

-Strut has .250" bore

-Very stable mounting bracket (4 screws to Transom, 2 screws to lock strut)

-Screws are 4-40 Stainless w/ Locknuts

- Back of strut is counter sunk for bullet nose drive dogs (also availible from CMDi)

- For .12 thur .28 powered boats

Contact CMDi at [email protected] or call 386-208-1036.

Ph. hours are 12 noon till 5 PM EST

Sweet ! I know what i'm doing next payday . Looks perfect for the JAE.12G .

 

[Grimracer]

Andy,

Any suggestions for a smaller rudder. The SpeedMaster micro rudder is a tick to large for most 12 boats.

Let me know if you get anything in the works..

I just have not found a rudder I like for my 12 boat.. its holding up the project.

Thanks dude

Grim

 

[jefffro007]

Andy,

Any suggestions for a smaller rudder. The SpeedMaster micro rudder is a tick to large for most 12 boats.

Let me know if you get anything in the works..

I just have not found a rudder I like for my 12 boat.. its holding up the project.

Thanks dude

Grim

Mabye with and without cooling ??

 

[Andy Brown]

Andy,

Any suggestions for a smaller rudder. The SpeedMaster micro rudder is a tick to large for most 12 boats.

Let me know if you get anything in the works..

I just have not found a rudder I like for my 12 boat.. its holding up the project.

Thanks dude

Grim

Yes, we have a new mini rudder that is smaller than the Speedmaster mini.

It is scaled down from our medium and large rudder systems. The bracket parts are ready,

we just need to make the blades...yes we will do them with and without water p/u.

I'll post a photo shortly.

 

[Grimracer]

Thanks Andy.

Big Bryon.. Ronnie.. Looks like we are going to have rudders for our 12 boats soon.

Water cooling for me!

Thanks

Grim

 

[Zach Davis]

New Mini Strut from CMDi Only $19.95

-Strut has .250" bore

-Very stable mounting bracket (4 screws to Transom, 2 screws to lock strut)

-Screws are 4-40 Stainless w/ Locknuts

- Back of strut is counter sunk for bullet nose drive dogs (also availible from CMDi)

- For .12 thur .28 powered boats

-For light weight mounting on .12 Nitros or small FE's one bracket half can be used.

Contact CMDi at [email protected] or call 386-208-1036.

Ph. hours are 12 noon till 5 PM EST

We also have a few .150" cables with .187" stub in stock.

Also .187" X .312" bullet nose drive dogs.

New CMDi mini rudder coming soon

Pictured below.

-Has 1/8" pivot pin

-2-56 brass screw for blade brake-away

-Bracket is .800" tall, mounts with 4-40 screws

-Set back is 1.1" from transom to pivot pin

-tiller arm machined as one peice with pivot bracket

-Will work on Left or right side of hull

Sorry parts where not cleaned up for this Photo!

Andy,

Do you have .187 bushings for the struts? If so how much?

Thanks,

Zach

 

[Andy Brown]

Details of new CMDi mini rudder are now in first post.

Zach, If you are meaning the press in type. Sorry, but we don't have that type.

 

[Ray Sametz]

Andy, are these still available. :unsure:

 

[153stars]

Is the mount for the rudder going to be different to fit the stock JAE wooden plate. I wish they didn't drill the one big hole in the tub extension for the kit . I did the extra plate on side of tub JAP style got used to the way it looked and will fill the other larger hole in extension .Cool Andy I have been holding out for something I really liked.

 

[Andy Brown]

Ray, they are all out of stock at the moment but we will have them back soon....thanks for asking.

Mark, That would be an easy bracket to make. We might do it.

I'd like to hear some input on how everyone likes that rudder mounting method on the back of the JAE.

 

[BigBryon]

Thanks Andy for taking on a project to make these small parts for our boats.

Mike you are right can not what to get these products to get working on my .12 again.

Water cooled for me also.

BigBryon

 

[Marty Davis]

I just got 2 of the new Strut Assemblies and they are SUPERB. Can't wait to put one on my new .21 boat. I had the strut that I usually use and this one is much smaller and lighter.

Very nice piece and one that is a must for the JAE .12 boat and I would also put one on the new .21 boat.

At $20, you can't miss on this.

 

[Jim Caldwell]

How tall is the strut?

 

[Andy Brown]

How tall is the strut?

1.7" top to bottom. Length is 1.6"

 

[TERMINATOR]

How tall is the strut?

1.7" top to bottom. Length is 1.6"

are the rudders ready ? if so ill take 2 of them and the struts to match , thanks

tk

 

[Tony Newland]

Hey Andy... been a few years since the buggy nats in vegas huh? haha how ya been?

I'm bulding a couple boats over the winter to run next year, getting back into ats and no tunnels this time just 12 and 21 riggers. My .12 kit is just about done and I think I'm going your direction for the hardware..... did the rudders get completed? If so I'm interested in a water cooled and one of your struts..... what bushing/flex shaft combo do you recommend for an AE w/.18?

Hope all is well... happy holidays

 

[Andy Brown]

Terry, I'll let everyone know here as soon as they are ready.

Hey Tony! Good to see you running boats. I'd go with a .150 flex and the free spinning brass bushing. That type bushing system will last a very long time.

 

[Tony Newland]

Sounds good..... when I'm ready I'll give you a jingle

 

[shawdaddy]

Andy, Whats the word on the rudders. I'm making a parts list and need to know which way to go. Thanks, Ryon