New JAE 21 GT BUILD

[JUSTINROGERS]

Well i received my new boat the other day. Time to start building.

 

[JUSTINROGERS]

The first coat of sealer is on

 

[johnsteltzer]

Hi justin I have the measurements from joe at zippkits for the fuel tank if you need one SS CUSTOM FUEL TANKS thanks

 

[JUSTINROGERS]

Hi justin I have the measurements from joe at zippkits for the fuel tank if you need one SS CUSTOM FUEL TANKS thanks

Ok I'll let you know.

 

[johnsteltzer]

Sounds good thanks

 

[Adam Blevins]

Don't think just get the tank. Trust me well worth it IMHO! Works flawless in my 21GT. Came in the other day and went to remove the remaining fuel from my tank as i was done testing for the day and made maybe 2 cranks max on my fuel pump and fuel was gone.. so i know i was on fumes... Engine ran steady entire time even being VERY low on fuel.

 

[JUSTINROGERS]

Got the sides put on the sponsons and the bulkheads glued in

 

[timothy johnson]

Justin, things are looking good!! I know you will want to heat race your new boat so here are some pics of my Walt tank that has plenty of fuel for racing. Since your boat is not done you can remove the deck material and boom tube doubler material before assembly so the tank fits. I'm running one of John's tanks in my 45 and his stuff is great also. Justin this is my GT21, see you in Tampa. Tim

Front Height@ 1 1/8, Rear Height@ 1 3/8 ( fuel outlets end) Width 2 3/4, Length 5"

 

[JUSTINROGERS]

Looks awesome. Im going to get one of John's tanks. what engine are you running Tim?

 

[timothy johnson]

Beta and DDNR, remember Justin if you use a tank that fits without a little cutting you may be close on fuel.

 

[JUSTINROGERS]

10-4

 

[johnsteltzer]

Here is timothy Johnston JAE 21 GT RACING tank all polished out

 

[timothy johnson]

Great Job John, lots of 60% to race with Stan!!

 

[brad nichols]

I like your build jig Justin!!

Brad

 

[johnsteltzer]

Thanks tim any time

 

[Adam Blevins]

What are the dimensions on that tank John?

 

[stan simpson iv]

Great Job John, lots of 60% to race with Stan!!

I am the Off Shore Bouy "KING"

....

 

[johnsteltzer]

I heard that Stan adam the measurements are 5 inches long 2 3/4 wide X 13/8 × 1 1/8 tall

 

[JUSTINROGERS]

Here is timothy Johnston JAE 21 GT RACING tank all polished out

Looks great John

 

[JUSTINROGERS]

I like your build jig Justin!!

Brad

Thanks Brad