New Canard

[Gary Murcott]

If it looks like the Dagger Boat Works Stiletto then I got it right this is a gas boat 43 inches long going to run a new Q D this is the plug will have the mold by next week

Comments Welcome

 

[What up Dog]

Gary the new Canard looks Great. Keep us up todate on the build.

Brian

 

[Steve Seebold]

That's way cool. Is it going to be shoe box or clam shell design?

 

[Gary Murcott]

Thank Steve it will be a shoe box to hard to make it strong enough on the seam with a clam shell

Gary

 

[Patrick Mulvany]

Gary,

It wasn't till the third photo I realized the was no sponsons?? You are right the deck is looking very "Dagger"!! Are you going to offset the right sponson on this?? "Dagger" was 1/8" deeper on the right side.. Lookin' good as usual!!

Later!!

Pat

 

[Steve Seebold]

It's going to be interesting to see what the finished boat looks like. I have one from Brian Bounds (what up dog) that has a Quickdraw 30.5 for power. All I can say is awesome, but this is my first canard so I have nothing to compare it to.

 

[Gary Murcott]

Not going to off set the rt sponson I have a set of molds for the Dagger Stiletto but when I maid the molds I took that out and the boat ran better

 

[Gary Murcott]

Steve the boat you have I built and designed and sold the molds to Brian I have eight years of r and d in that boat my new build is running the same bottom as yours I have always liked the look of the stiletto so I thought I would build a bigger look alike

Gary

 

[Curtis Maglinger]

Not going to off set the rt sponson I have a set of molds for the Dagger Stiletto but when I maid the molds I took that out and the boat ran better

Gary, curious what you meant by it ran better after you made the right sponson the same depth .....what did It help with that the original boat couldn't do?

 

[Gary Murcott]

Curtis I maid the mold off the original had a lot of problems with it hooking changed the rear sponsons to be the same different boat a lot smother in the corners

 

[Curtis Maglinger]

Gotcha, didn't know if I needed to try something like that on our Stilettos, but wanted to see what it improved over the original design first. Thx

 

[Gary Murcott]

Curtis I was running a Mac 84 don t know if it is needed with a 45 I see you have a mod for the front sponson

Gary

 

[Patrick Mulvany]

Curtis,

You still got some "Stilleto's"??? They are older than you are!!! I never had a problem back in the day with the Nitro Stilleto's but maybe a slat on the left sponson to even them up may make a difference?? What was old is always NEW AGAIN!!!!

Later!!

Pat

 

[Gary Murcott]

These are out of my molds

 

[Rick Reisinger]

Gary

Contact me please about this Canard .......

 

[Joenagy]

Gary you have a PM

 

[What up Dog]

Gary you have a PM

Joe you have a PM