Need help with my set up plz

[James montgomery]

I need help with,my setup in my rigger i have a super tiger 18 in it and pipe is set at 7 1/2 and a 1440, it hit 38mph for top speed, i should be way faster then that p.lz help me.

Im willing to try new setup and diff moters and props and pipe leanth

 

[James montgomery]

It is a 12 rigger by the way

 

[Jim Mamaril]

With the ST 18 in its stock form you will not get much more out of it, the timing just does not let you get the RPM you need to get the speed. You could try a smaller prop in the 37 mm range and shorten the pipe to 7 1/4 . A Nova Rossi .12 would be the best bang for your buck in my opinion.

Jim

 

[SayMikey]

A Lynx cut 1440 should work good

 

[James montgomery]

Now wht u mean by cut, sharpend and balanced, or how i see most guys props cut down buy where the prop shaftgoes

 

[James montgomery]

Any ideas on where i could get a good used rossi, im on budget and cant aford to spend to much

 

[James montgomery]

I also have a os max tz would that be a better choies maybe as far as power and higher rpm

 

[Neil LaGarry]

I ordered a few CNC props from here http://kintecracing.com/

they are NOT cast Alum.

they made from billet alum.

 

[James montgomery]

Cool thanks man will cheack that out

 

[Jim Mamaril]

I also have a os max tz would that be a better choies maybe as far as power and higher rpm

Yes that would be a better choice than the ST.

 

[James montgomery]

Would i see much more gain with the os or about the same, i knoww that os screams, but dont know much about them

 

[James montgomery]

Any setup info would be great?

 

[Jim Mamaril]

What hull is it ??

 

[RodneyPierce]

James, there is really no setup info needed for the hull....  Its a JAE.  Prop the boat to what your motor likes, and go.  I would replace that front boom tube first off.  Its bent like we discussed last weekend........  You have ran it one weekend, or maybe two?  Spend some time on the boat man.  People dont find speed just over night

 

[Butch Londrigan]

Get the carbon tubes from zippkits (cheep). That engine you are running has never ran right i think it had some lean runs. Bill had the same problems you are having with the jae 12 he sold you. If i can help this weekend i will.

 

[James montgomery]

Cool thanks guys, I knoe im trying to move fast and want more out of my boats, I need to slow down and take in all the info

and go one step at a time, thank u for reminding me about that boom, I forgot about it thank u rodney. And thank u butch see u sunday guys

 

[James montgomery]

Im going to bring it this weekend and my os and a dif mac pipe I got to, one step at a time need to slow down and just work on

them. Rodney dont forget that contorler, I should have some money for ya sunday for it