Need a blue head MAC84 case

[Don Ferrette]

I need a blue head MAC 84 case, anybody got one?? :unsure:

 

[Joe Warren]

I need a blue head MAC 84 case, anybody got one?? :unsure:

Don Ralph has 2 Mac 84 engines for sale out of a twin.

 

[Don Ferrette]

I need a blue head MAC 84 case, anybody got one?? :unsure:

Don Ralph has 2 Mac 84 engines for sale out of a twin.

While that would yield a sxxtload of spare parts all I need is a case. I would even consider a blue head 67 case & have it bored. I need the case to repair a supposedly "cherry" 84 I got in a trade. Turns out the bore between the bearings was "cleaned up" by the previous owner & now it sucks air like a vacuum cleaner because the crank seal can't be maintained. Of course I didn't find this out until after I freshened up the motor with new bearings & tried to run it in one of the twins. :angry:

 

[tnrcboatracer]

Have you considered placing a bronze bushing in for a crank seal? I believe thst several on here can do that for you; Frank Orlic, Rod G, or John A. It would probably be cheaper than a new case, and work better. IF none of those will do it, I might have a contact who can do it. I plan to have the capability to do that type of work, but my lathe is on a pallet until the shop gets done.

 

[dave roach]

Don

Give Brad Chirsty a call Brad can fix you up. You no I get a cut from that.LOL

Dave Roach

 

[Mike Hughes]

I had the same problem with one of my twin motors that I bought off of someone else. Very hard to tune. I ended up just putting in one of those sealed bearings on both engines. Problem solved. I did not even have to change the bearings. I jsut popped out the the seal and put it in the motor.

 

[Buckshot]

If you can't find a case than I think I have a great home for the piston and sleeve in your hurt motor.

-Buck-

 

[Don Ferrette]

If you can't find a case than I think I have a great home for the piston and sleeve in your hurt motor.
-Buck-

I have a great home for that case you can't get a piston & liner for.

There has got to be a good case out there somewhere at a reasonable price ....... :unsure:

 

[Joe Warren]

If you can't find a case than I think I have a great home for the piston and sleeve in your hurt motor.
-Buck-

I have a great home for that case you can't get a piston & liner for.

There has got to be a good case out there somewhere at a reasonable price ....... :unsure:

The other 84 engines I spoke of earlier... HAVE Been SOLD Thanks I/W

 

[Don Ferrette]

Still looking ............. :unsure: