Hello, can you guys tell me a proper way to mount canard wings on a pickle fork hydro. I fabed the wings and now need to mount them. Is there a trick in getting a rod threw them and the cockpit area? You don't just glue them to the sides of the cockpit and sponsons do you? any advice would be highly appreciated. so far this board has been really helpful!
Mounting front canard wings on scale hydro
- Thread starter GOTTI
- Start date
Help Support Intlwaters:
Brian Schymik
Well-Known Member
- Joined
- Nov 24, 2002
- Messages
- 777
Hi..
Well if you already made them, then u might have some trouble....
I made mine with one solid piece of balsa that went thru the cockpit section and then cutout slots in the sponsons for it too. It is solid and adds rigidity to the hull too. It has epoxy and glass covering and is light.
Brian
Well if you already made them, then u might have some trouble....
I made mine with one solid piece of balsa that went thru the cockpit section and then cutout slots in the sponsons for it too. It is solid and adds rigidity to the hull too. It has epoxy and glass covering and is light.
Brian
Bob Howard
Well-Known Member
- Joined
- Jan 12, 2004
- Messages
- 572
If you are talking about the adjustable part of the front wings I have been wondering the same thing as I am getting ready to start on the 97 DeWalt. I would like to know how to set these up to be ajustable.
Bob
Bob
Similar threads
