looking for x637 prop

[mike stover]

Need a x637 for my 3.5 o/b. Can anyone help me locate one.

Thanks, Mike

 

[Zach Davis]

Need a x637 for my 3.5 o/b. Can anyone help me locate one.Thanks, Mike

http://www.offshoreelectrics.com/products.php?cat=87 These guys are great. Usually get parts in 2 days.

Zach

 

[Jerry Wyss]

I also used a 640 on that engine mike, if your good at working props, getting the 640's diameter down

to just below 38mm is a rocket. Nice thing about running a TT is you only need 1 or 2 props and they are

those two mentioned. But I run close to sea level most the time, if your above that by alot the 637

is the perfct choice.

JW

 

[mike stover]

I also used a 640 on that engine mike, if your good at working props, getting the 640's diameter downto just below 38mm is a rocket. Nice thing about running a TT is you only need 1 or 2 props and they are

those two mentioned. But I run close to sea level most the time, if your above that by alot the 637

is the perfct choice.

JW

Jerry, Thanks for all the good info, and all your help. Also to all others that replied.

Mike

 

[Bob Cormier]

I also used a 640 on that engine mike, if your good at working props, getting the 640's diameter downto just below 38mm is a rocket. Nice thing about running a TT is you only need 1 or 2 props and they are

those two mentioned. But I run close to sea level most the time, if your above that by alot the 637

is the perfct choice.

JW

Jerry, Thanks for all the good info, and all your help. Also to all others that replied.

Mike

Mike

The props are in stock at your local hobby shop, Evolution Hobbies.

Bob