looking for a x457 and x460

[Richard Haineult]

Hi,everyone.

I'm looking for two (cupped and balanced props for 1/8 scale application) one x457 and one x460. For info the boat weight is approx 13 pounds ready to run with a Mac .67 or a K-67 with ops pipe at 11 3/8 ''. using 50% nitro.I usually use a stock x460 with succes,but this year the track will be smaller (270 to 280 feet long) I'm trying to get the best prop possible.Any advice is welcome

thank's Richard

 

[Dan Kramer]

i run a 455/3 done by props-4-u (mark sholund) tried 460/457.

 

[Dan Kramer]

i run a 455/3 done by props-4-u (mark sholund) tried 460/457. x455/3 works real well!! boats about same weight , but style, set-up can all vary what works.

 

[Dan Kramer]

i run a 455/3 done by props-4-u (mark sholund) tried 460/457. x455/3 works real well!! boats about same weight , but style, set-up can all vary what works.

i do not have either, sorry

 

[FloridaScaleBoater]

Octura Y557= X457 with 10% more pitch

Prather S255 thinned real good, sharpened, like a good knife.

Rick