- Joined
- Sep 12, 2008
- Messages
- 599
Built this T2 in 2015, the fleet is getting too big, boat is almost RTR, just add your receiver and your set.
List of parts:
- CMB beta 21, just did the break in on it last fall, bench ran, 2 on water runs at moderate speed, never pushed, essentially brand new.
- custom Walt B stainless tank with hump reserve, you'll never run out in a heat.
-CMB header/pipe with Lenny Blake muffler.
-zipkitt strut, accutech rudder
-new futaba servos, throttle/3rd channel fuel mix 3155's, rudder is 3170G.
-Ferrette remote needle.
- you supply your own prop.
- ski and sponson running surfaces are fixed, not the tape on version that Niklas advocates, you can do the tape on thing if you want, I'm just not a fan of that system of tuning.
Crazy fast boat, I used to run my NR 21 in it but moved it over into another hull of mine.
Sweet deal, ready to go, $500 US, will share shipping with buyer, within reason.
List of parts:
- CMB beta 21, just did the break in on it last fall, bench ran, 2 on water runs at moderate speed, never pushed, essentially brand new.
- custom Walt B stainless tank with hump reserve, you'll never run out in a heat.
-CMB header/pipe with Lenny Blake muffler.
-zipkitt strut, accutech rudder
-new futaba servos, throttle/3rd channel fuel mix 3155's, rudder is 3170G.
-Ferrette remote needle.
- you supply your own prop.
- ski and sponson running surfaces are fixed, not the tape on version that Niklas advocates, you can do the tape on thing if you want, I'm just not a fan of that system of tuning.
Crazy fast boat, I used to run my NR 21 in it but moved it over into another hull of mine.
Sweet deal, ready to go, $500 US, will share shipping with buyer, within reason.
