K-B PARTS AND MOTORS,

[Chuck Carpenter]

I HAVE SENT 2 SAMPLE PICS OF K-B PARTS AND MOTORS THAT IHAVE, THIS JUST A SAMPLE, CHUCK CARPENTER 330-241-4742- OR EMAIL [email protected] I SEE A LOT OF REQUESTS FOR k-b ON HERE, SO COME AND GET IT,

 

[BB Mods's]

dibs on that rear exh motor sitting in the far left/top corner

can i get a few more pics?

 

[Mike Luszcz]

Do you have any 3.5cc OB hinge plates, 3.5cc P/S sets, or 11cc P/S sets? Thanks, Mike Luszcz, [email protected]

 

[Chuck Carpenter]

Do you have any 3.5cc OB hinge plates, 3.5cc P/S sets, or 11cc P/S sets? Thanks, Mike Luszcz, [email protected]

I have a K-B expert comming over today, to help arrange all this stuff into groups of 3.5 and 7.5, have had over 30 e,mails and calls, i will do my best to keep everybody happy, i am trying to keep everyone on a first come first basis, i will be taking more pics today, but will have to email them, as people ask,

Thanks Chuck

 

[Mike Luszcz]

I would like some more pics please, [email protected]. Thanks, Mike

 

[Chuck Carpenter]

I still Have a few parts left, 3 7.5 pistons and sleeves, that seemed to be the most wanted,

Also have a full card, of 12 K-B factory glow plugs, they are for the 3.5 motors KB- 1S short reach reg 5.39 each, 25 percent off THAT IS DEALER COST, 4.04 EACH OR THE WHOLE CARD FOR 48.00

Thanks for all the calls and messages, i could not even keep up there for awhile,

Chuck

 

[Mike Luszcz]

Hey, did you have a 3.5cc hinge plate??? Thanks, Mike

 

[Brian Sorgente]

I need a rod for a K&B 3.5 SS. Have one of those?

Brian

 

[namba1418]

would like the purple carb email [email protected]

thanks, nick

 

[Chuck Carpenter]

would like the purple carb email [email protected] thanks, nick

Nick, i sent you an updated email, i have 3 p/s sets, for 7.5 out board, they also fit inboards, i also have 4 new rods for 7.5, the man looking for 3.5 mounting plate, i have 3 of those, please contact me for shipment,
Chuck PS 2 OF THE 3 7.5 ARE MODDED.PISTON AND SLEEVES

 

[Mike Luszcz]

would like the purple carb email [email protected] thanks, nick

Nick, i sent you an updated email, i have 3 p/s sets, for 7.5 out board, they also fit inboards, i also have 4 new rods for 7.5, the man looking for 3.5 mounting plate, i have 3 of those, please contact me for shipment,
Chuck PS 2 OF THE 3 7.5 ARE MODDED.PISTON AND SLEEVES

Chuck, I just sent you a PM about the hinge plates, and a lower unit if you have one. Thanks, Mike Luszcz

 

[Lauren Porsch]

Hello Charles. Lauren Porsch here. I have an older K&B 40 engine that I lost the remote needle assy. I also lost the muffler for this engine. Can you help me with any of these parts. Thank you

 

[Chuck Carpenter]

Hello Charles. Lauren Porsch here. I have an older K&B 40 engine that I lost the remote needle assy. I also lost the muffler for this engine. Can you help me with any of these parts. Thank you

I HAVE A BRAND NEW REMOTE NEEDLE VALE SET, CHECK AND SEE HOW MUCH THEY ARE, TAKE OF 25 PERCENT AND ITS YOURS, THANKS CHUCK

 

[Lauren Porsch]

Hello Charles. Lauren Porsch here. I have an older K&B 40 engine that I lost the remote needle assy. I also lost the muffler for this engine. Can you help me with any of these parts. Thank you

I HAVE A BRAND NEW REMOTE NEEDLE VALE SET, CHECK AND SEE HOW MUCH THEY ARE, TAKE OF 25 PERCENT AND ITS YOURS, THANKS CHUCK

Hello again Chuck. I found one on Mecoa Shop K&B # 985.002 for $24.95. Will $20.00 + shipping do it. Does yours have a bracket? I will send you a USPS money order for it. Thanks Lauren

 

[Chuck Carpenter]

Hello Charles. Lauren Porsch here. I have an older K&B 40 engine that I lost the remote needle assy. I also lost the muffler for this engine. Can you help me with any of these parts. Thank you

I HAVE A BRAND NEW REMOTE NEEDLE VALE SET, CHECK AND SEE HOW MUCH THEY ARE, TAKE OF 25 PERCENT AND ITS YOURS, THANKS CHUCK

Hello again Chuck. I found one on Mecoa Shop K&B # 985.002 for $24.95. Will $20.00 + shipping do it. Does yours have a bracket? I will send you a USPS money order for it. Thanks Lauren

Yes it has the bracket, sent you a personal message, with the information on it, Thanks

FURTHER TO THE NINE PEOPLE, WHO BOUGHT AND PAID FOR THINGS, YESTERDAY, ( MONDAY ) ALL OF YOUR ITEMS ARE IN THE PRIOITY MAIL,

THANKS CHUCK,

 

[Lauren Porsch]

Hello Charles. Lauren Porsch here. I have an older K&B 40 engine that I lost the remote needle assy. I also lost the muffler for this engine. Can you help me with any of these parts. Thank you

I HAVE A BRAND NEW REMOTE NEEDLE VALE SET, CHECK AND SEE HOW MUCH THEY ARE, TAKE OF 25 PERCENT AND ITS YOURS, THANKS CHUCK

Hello again Chuck. I found one on Mecoa Shop K&B # 985.002 for $24.95. Will $20.00 + shipping do it. Does yours have a bracket? I will send you a USPS money order for it. Thanks Lauren

Yes it has the bracket, sent you a personal message, with the information on it, Thanks

FURTHER TO THE NINE PEOPLE, WHO BOUGHT AND PAID FOR THINGS, YESTERDAY, ( MONDAY ) ALL OF YOUR ITEMS ARE IN THE PRIOITY MAIL,

THANKS CHUCK,

I'm sorry Chuck. I don't seem to have the personel message you sent. Could you please retry. Lauren

 

[Chuck Carpenter]

Hello Charles. Lauren Porsch here. I have an older K&B 40 engine that I lost the remote needle assy. I also lost the muffler for this engine. Can you help me with any of these parts. Thank you

I HAVE A BRAND NEW REMOTE NEEDLE VALE SET, CHECK AND SEE HOW MUCH THEY ARE, TAKE OF 25 PERCENT AND ITS YOURS, THANKS CHUCK

Hello again Chuck. I found one on Mecoa Shop K&B # 985.002 for $24.95. Will $20.00 + shipping do it. Does yours have a bracket? I will send you a USPS money order for it. Thanks Lauren

Yes it has the bracket, sent you a personal message, with the information on it, Thanks

FURTHER TO THE NINE PEOPLE, WHO BOUGHT AND PAID FOR THINGS, YESTERDAY, ( MONDAY ) ALL OF YOUR ITEMS ARE IN THE PRIOITY MAIL,

THANKS CHUCK,

I'm sorry Chuck. I don't seem to have the personel message you sent. Could you please retry. Lauren

PARTS ARE RUNNING LOW, STILL HAVE 3 COMPLETE OUTBOARDS 2 IN 7.5 AND 1 IN 3.5

 

[seeray99]

I HAVE SENT 2 SAMPLE PICS OF K-B PARTS AND MOTORS THAT IHAVE, THIS JUST A SAMPLE, CHUCK CARPENTER 330-241-4742- OR EMAIL [email protected] I SEE A LOT OF REQUESTS FOR k-b ON HERE, SO COME AND GET IT,

cHUCK, WILL TAKE 1 STOCK PISTON AND SLEEVE FOR THE MOTOR I'M BUYING. BILL

 

[Chuck Carpenter]

I HAVE SENT 2 SAMPLE PICS OF K-B PARTS AND MOTORS THAT IHAVE, THIS JUST A SAMPLE, CHUCK CARPENTER 330-241-4742- OR EMAIL [email protected] I SEE A LOT OF REQUESTS FOR k-b ON HERE, SO COME AND GET IT,

cHUCK, WILL TAKE 1 STOCK PISTON AND SLEEVE FOR THE MOTOR I'M BUYING. BILL

THANK YOU BILL, 2 MODDED K-B PISTON AND SLEEVE SETS, LEFT 75.00 EACH CHUCK

 

[GarsonConnor]

Hello Chuck,

Any of the 7.5 K&B P/S sets left that would work in an inboard?

Pics and info to [email protected] .

Thanks

Garson