Parts Wanted K&B 67 OB head shims

[XtremeRcBoats]

Hi Guys,

Looking for some head shims for a K&B67 OB. Anyone has a set that they would like to sell.

Can only pay with Paypal and needs to be shipped to the Netherlands.

Tnx.

 

[Kris Flynn]

while it is not the cheapest option. I have a supplier who can laser cut what ever thickness head or liner shims you need.

let me know if no one has the stock ones and you need something cut.

cheers

 

[Wasted wages]

Hi Guys,

Looking for some head shims for a K&B67 OB. Anyone has a set that they would like to sell.

Can only pay with Paypal and needs to be shipped to the Netherlands.

Tnx.

If you have access to a lathe, take a small piece of 1/4” marine plywood and drill a hole in the center.
Run a 1/4” bolt thru it, and back it up with a fender washer and nut. Chuck it up in the lathe.

Stick some double sided sticky tape on it.
Stick whatever thickness you need of shim stock to the tape…

Sharpen up a thin parting tool, stick it in the tool post and cut away..

Not the fastest, but I’ve made a lot of shims this way..

 

[XtremeRcBoats]

tnx for the info guys. Do not yet know what i need. I'm getting a head from Terry Keeley. Once i have received it, I'll test it and see what thcinkess I need.