Julian Conde Chasing Tom Foley's Twin Rigger

[julianconde]

enjoy

julian conde

 

[ALLAN YUEN]

better improve ride what size of propellers did you run ?

 

[julianconde]

H48 im working on the 1667 from whitton, H32 from sholund and the H667 also

julian

 

[thomaselkins]

Not bad for couple of single 60s

 

[brett english]

Not bad for couple of single 60s

hey elkins, somebody needs to give Nub a kick in the butt!! can we get this guy running?? and what about you, will

u join us for 60mono..we have an xtra seaducer turn key..but only for sale to a district 3 member

 

[julianconde]

60's :huh:

 

[thomaselkins]

Not bad for couple of single 60s

hey elkins, somebody needs to give Nub a kick in the butt!! can we get this guy running?? and what about you, will

u join us for 60mono..we have an xtra seaducer turn key..but only for sale to a district 3 member

I did that once ran mono then rigger, cant seem to make the change its like driving a VW bus (mono)then getting into a nice Porsche 936 (rigger) big change over. I need things that do what I tell them to do, that's why I like my Dogs.

 

[Joe Warren]

Julian, Boat looked Great!! Need BIG BLOCKS 101`s!!!! or VAC91`s.. Time to POWER UP.........Remember the VAC91`s are very user friendly. You can pratically run them out of the box. Make the call & get them broke in before the winter nats........

 

[julianconde]

Thanks Mr Warren I appreaciate that the boat is running good thanks to Ralph Almirola and Tom foley. Still have to try to sort out some things with the right engine but we will see if it runs better if not. Then I'll have to race it as such.

Julian

 

[julianconde]

Joe Warren you have a PM

 

[Joe Warren]

Thanks Mr Warren I appreaciate that the boat is running good thanks to Ralph Almirola and Tom foley. Still have to try to sort out some things with the right engine but we will see if it runs better if not. Then I'll have to race it as such.

Julian

See if you an find a set of 13cc Mac Pipe Products #1385 Open nitro pipes. Put them on @ 12 inches. You will let more heat out & could pull more prop cup.

 

[julianconde]

i have a set of Macs 80 Size Open Pipes

 

[Joe Warren]

i have a set of Macs 80 Size Open Pipes

I would try those to see if your engine problem goes away. the inside engine (RS) always runs with more load thru the corners. 12 inches is very forgiving length. p.s 80 size is 13cc pipes

 

[julianconde]

k will try and hit you up afterwords ok thanks Joe.

julian

 

[ALLAN YUEN]

Better will you replace new Pistons/sleeves modded ( CMB80 RS red headed ) than CMB 80 HR green headed. It really fast and powerful. Contact Stu Barr Or Al Hobbs will get new A/A84 so I dont know when will it ready sell Good Luck!