JRX T45

[P THOMAS]

I dug this boat up to work on, been about 3 years waiting to get a round tuit.
The cowl is fitted, pipes mounted,radio box covers done. I will mount the needle valves in front of motors controlled by a savox waterproof servo.
The motors are MAAC 45, Mac case with AA cylinders and head buttons.

 

[David Ashcroft]

Great looking rig Phil

Is JRX still on business?

 

[Jeff Barnes]

Looking good Phil stay after it hope to see it run this season

 

[P THOMAS]

Looking good Phil stay after it hope to see it run this season

I will get it running soon, don't know about racing with the big dogs.

 

[P THOMAS]

So I will need props for this twin 45 2217 sound good?

 

[XtremeRcBoats]

Looks great Phil. How are the rear sponons connected. Are they adjustable?

 

[P THOMAS]

Paul, There are bolts thru the hull, they could be adjusted.

 

[XtremeRcBoats]

Tnx, haven't seen this before. Good luck with the maiden run.

 

[derek owen]

pm sent

 

[Bill Gibson]

I've got the JRX 67/80 boat which i got about3 years ago.......i need to get off my lazy butt and put it together! They are nice race boats!

 

[Mike Hughes]

Like the push pull on the third channel. Been there, done that before. Nice.
Mike

 

[P THOMAS]

Like the push pull on the third channel. Been there, done that before. Nice.
Mike

Yes I figure that should work well

 

[P THOMAS]

Now I find no source for 3/16 x 30" flexcable shafts maybe have to convert to 1/4 stepdown 3/16 shafts. I would have to takeout tubes from hull and replace 3/16 struts and replace engine collets

 

[Mike Hughes]

How about running ferrel Phil? You can buy bulk cable from octura.

 

[Mike Hughes]

I ran mine with square drive collets. The boat died when it ran into a tree. I still have the cables. They are 22.5 from back of ferrell to end of square. You can have them if they work for ya.
Mike

 

[David Ashcroft]

Now I find no source for 3/16 x 30" flexcable shafts maybe have to convert to 1/4 stepdown 3/16 shafts. I would have to takeout tubes from hull and replace 3/16 struts and replace engine collets

Tony has them in stock speedmaster 3/16" x 30"

 

[gilbert galli]

you have the flex 100cm on ebay

https://www.ebay.com/itm/1641455587...mwiv1x+pylfpyyv6Vow3h+QD/6|tkp:Bk9SR9zU-MbOYQ

 

[P THOMAS]

I have the JRX twin 45 ready to go. Need info on the front sponson spacing and strut depth.

 

[Tim Kish]

Very cool

 

[Lay26]

Great job ...boat looks awsome