thanks shaneWalt has the pattern for the tank for the jae21
Dave Roach
The .21 boat is built to told an 8oz Sullivan tank. If you were to fill the tank area with a custom tank it would be way too big. I had Walt build a tank for me but provided him with the dimensions. I talked to him first about the capacity before he went ahead. Mine came out to 9.4oz. Just a heads up.Need to know sizes L x W x H so i can get a tank made by walt for a jae 21
thanks shane
Dave,Ron
I have no problem with the tank Walt made for me and it fits great.I like to carrier little more fuel for the red head CMB .I will have picture up tonight.
Dave Roach
Depending upon which calculator you believe, that works out to between 12.8 oz to 13.3333 ozDave,Ron
I have no problem with the tank Walt made for me and it fits great.I like to carrier little more fuel for the red head CMB .I will have picture up tonight.
Dave Roach
I'm not questioning your tank or the quality of it. I run Walts tanks in all my boats. I'm just trying to help Shane make an informed decision. I sat my current .21 tank in the open cavity and had over an inch of extra space, front to back. Enough space in fact that I considered putting in a bulkhead to hold that particular tank. Problem is... I couldn't decide wheather to keep the tank more forward or back. Not to mention I cut the hull down almost 1/2" off the top. I'm just guessing but if you filled the cavity with a tank that fits close, you would be carrying around 12oz or so. Way too much for a .21 in my opinion. Looking forward to the pics.
ps. If someone could do the volume math. The dimensions are as follows... 5" L x 2 3/4 W x 1 3/4 H
Later, Ron
Thanks for that Wes. Shouldn't be hard to pass Dave with a full tank. LolDepending upon which calculator you believe, that works out to between 12.8 oz to 13.3333 ozDave,Ron
I have no problem with the tank Walt made for me and it fits great.I like to carrier little more fuel for the red head CMB .I will have picture up tonight.
Dave Roach
I'm not questioning your tank or the quality of it. I run Walts tanks in all my boats. I'm just trying to help Shane make an informed decision. I sat my current .21 tank in the open cavity and had over an inch of extra space, front to back. Enough space in fact that I considered putting in a bulkhead to hold that particular tank. Problem is... I couldn't decide wheather to keep the tank more forward or back. Not to mention I cut the hull down almost 1/2" off the top. I'm just guessing but if you filled the cavity with a tank that fits close, you would be carrying around 12oz or so. Way too much for a .21 in my opinion. Looking forward to the pics.
ps. If someone could do the volume math. The dimensions are as follows... 5" L x 2 3/4 W x 1 3/4 H
Later, Ron
Wes
Enter your email address to join: