JAE21 Pipe Lenght

[mr_fons]

Folks:

I’m running a JAE 21 with a Nova Rossi at an altitude of 2250’ (686m) and was wondering what length I should start my pipe lenght at.

Thanks

 

[Ron Zaker Jr]

3.5" and go in from there. H-5,H-7,1445,1450 to start.

 

[Duck899]

Fons, I had to cut quite a bit off the header on mine. Can't cut the pipe but mine has about 1/2" of straight pipe left on the header. Go to great hobbies or Hobby wholesale and get those car couplers that have the curved section so they go around the header a bit. Doug uses them on his 21 rigger.....Go get em in Edmonton....

 

[Charles Perdue]

Fons, I had to cut quite a bit off the header on mine. Can't cut the pipe but mine has about 1/2" of straight pipe left on the header. Go to great hobbies or Hobby wholesale and get those car couplers that have the curved section so they go around the header a bit. Doug uses them on his 21 rigger.....Go get em in Edmonton....

Does anyone know the part # and where I can get these curved pipe couplings in the US?

 

[Duck899]

Fons, I had to cut quite a bit off the header on mine. Can't cut the pipe but mine has about 1/2" of straight pipe left on the header. Go to great hobbies or Hobby wholesale and get those car couplers that have the curved section so they go around the header a bit. Doug uses them on his 21 rigger.....Go get em in Edmonton....

Does anyone know the part # and where I can get these curved pipe couplings in the US?

These ones are made by venom racing.... http://www.greathobb...od_id=VEN2065BL Should be able to get them in the states at any good hobby shop. R/C car suppliers would be the best bet.

Here is a place in the states with a toll free order number.... http://www.rcplanet.com/Exhaust_s/1407.htm

 

[Charles Perdue]

Fons, I had to cut quite a bit off the header on mine. Can't cut the pipe but mine has about 1/2" of straight pipe left on the header. Go to great hobbies or Hobby wholesale and get those car couplers that have the curved section so they go around the header a bit. Doug uses them on his 21 rigger.....Go get em in Edmonton....

Does anyone know the part # and where I can get these curved pipe couplings in the US?

These ones are made by venom racing.... http://www.greathobb...od_id=VEN2065BL Should be able to get them in the states at any good hobby shop. R/C car suppliers would be the best bet.

Here is a place in the states with a toll free order number.... http://www.rcplanet.com/Exhaust_s/1407.htm

Thanks Mr. Rob.

 

[shoboat]

Charles,

I have them in stock, how many do you need?

Let Me Know,

Mark Sholund

 

[gooycheese]

Those exact couplers are at tower hobbies for $2.49 for the two pack ...... it does say they are in stock also.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXRHR5&P=7

 

[Chris Wood]

i bought the same ones at my hobby shop last week.. same price.. they said they are discontinuing them that is why they are so cheap.. been using them for several yrs now.. they used to be over 5.00 each

chris

 

[Ron Olson]

The Venom ones look exactly like the ones that were made by GS Racing. I got a few for my .12's but I'll have to see if a LHS can get the Venom ones.