jae trio

[chuck st romain]

thanks rod for building my motors and helping me with my first jae, this is what sparked my intrest in riggers and as you can tell i am hooked. cant wait for the 45 kit from joe. also thanks david for an awsome job on tthe hulls. 3 at a time was too many for me to take on but you nailed it.

 

[chuck st romain]

jae 12

 

[chuck st romain]

21G

 

[chuck st romain]

21FE

 

[chuck st romain]

i also included pictures of the vision craft tunnel as rod built me the motor for it also.

these are all new never run so i will have my hands full this weekend breaking in motors and setting up boats

thanks again and aloha

 

[griz2575]

Looks great

 

[KNahinu]

lookin good . when are we going see them run ?

 

[chuck st romain]

i have today off so i am going to try and sneak down around 4 to run the FE and start breaking in the 12 & 21 (i know that will make ira happy because i am sure they are going to be super quiet). i will probablly have them all ready to turn loose this weekend. i am in no hurry, still need to do the final touches (sharpen turn fins, 21 fuel tank and 12 servo set-up, tunnel tank and radio box switch.....) i am working on the FE right now and try it today. i am still waiting on props but they should be here mid week so nothing will be impressive till then.

 

[HOTWATER]

Whoo-Hooo!! I like them all Chuck!! What lipos are you going with in the FE? Did you get Mark Sholund to do some Props 4U?

-Kent

 

[chuck st romain]

right now i have some turnigy 5000 30c's and 3600 35c's that i will try untill i can get some good batteries. mark did props for all 4 boats...

 

[KNahinu]

see ya on the weekend. kinda windy today.

 

[HOTWATER]

right now i have some turnigy 5000 30c's and 3600 35c's that i will try untill i can get some good batteries. mark did props for all 4 boats...

I just got another prop today from Mark for the JAE FE...He does very nice work on them!

-Kent

 

[chuck st romain]

ran the FE today. 25+ mph winds and medium chop. still didnt get my prop so i used what i had. all i can say is that i am IMPRESSED with this boat. i was using cheapy 3600mah 4s and a m545 and it was well into the 50's. ran perfect, flat, stabil and never even wiggled at all (like my jae 12 does so that was no supprise). turns like it is on rails, like a rigger should. tempatures never got above 100 degrees after 2 minute runs. this boat renewed my love for FE's as i was almost all nitro now. i will get video when i can.

the only thing i wished i had today was a bigger pond....

the hawaii boys better watch out because this thing rips.

aloha

 

[TERMINATOR]

ran the FE today. 25+ mph winds and medium chop. still didnt get my prop so i used what i had. all i can say is that i am IMPRESSED with this boat. i was using cheapy 3600mah 4s and a m545 and it was well into the 50's. ran perfect, flat, stabil and never even wiggled at all (like my jae 12 does so that was no supprise). turns like it is on rails, like a rigger should. tempatures never got above 100 degrees after 2 minute runs. this boat renewed my love for FE's as i was almost all nitro now. i will get video when i can.

the only thing i wished i had today was a bigger pond....

the hawaii boys better watch out because this thing rips.

aloha

chuck they look sweet man.. good luck with them and they better be fast to stay ahead of them tsunami's ..glad you all are safe.

tk

 

[Ron Olson]

Nobody mentioned the boat stand, I like it!

 

[chuck st romain]

i live in a small appartment so space is everything. thanks!

 

[TOM DRIVER]

Nobody mentioned the boat stand, I like it!

WHAT SERVOS ARE YOU USING ONYOUR 21 G RIGGER

THANKS TOM

 

[TOM DRIVER]

Nobody mentioned the boat stand, I like it!

what servos are you using for your 21g rigger

thanks tom

 

[chuck st romain]

i am using hitec hs225mg for steering and hs85mg for throtle and 3rd