• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

JAE 21 with Novarossi RTR

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chuck st romain

Well-Known Member
Joined
Sep 6, 2009
Messages
537
This is a JAE 21 Rigger with novarossi t21-5m nitro. the overall condition is good and the boat has been sitting for about 4 months. it ran perfect last time out. it is ready to run and requires a prop, reciever and battery only to be on the water. i am no longer playing with nitro boats and this one has just been sitting. there is minor rust on a couple of nuts and bolts and a few small chips in the paint on the bottom where the ski meets the tub. otherwise it is in good shape. it may need a servo for the 3rd chanel but everything else tested good... the motor has been stored properlly with corosion block and has only been run about 10 tanks. the tub and sponsons were built by david at cdc race, sealed with epoxy resin. the boat includes:

jae 21 rigger kit $79, jim m's strut $20, zip rudder $18, 3/16 flex shaft $18, zip motor mount $17, octura coupler $12, boom tube clamps $8, hiTec hs-85mg x 2 $60, hiTec hs-225mg $30, novarossi t21-5m motor, header, pipe $300, fuel tank, starter belt, switch, filter, ect,

i have over $700 into building this boat. shipping will be USPS priority to mainland US. sponsons, strut and rudder will be removed for shipping.

$400 includes usps priority shipping, international shipping available for an additional $20 fisrt paypal to [email protected] also for sale on offshore electrics.
 
Last edited by a moderator:
Back
Top