ISO Fuel Bag Holder

[David Santistevan]

I am looking for a lightweight fuel bag holder that allows for easy change out of the bags. Can anyone offer a suggestion? I have seen the wire units the span the rails but I am looking for something with a little more substance.
Thanks,
D

 

[FloridaScaleBoater]

I am looking for a lightweight fuel bag holder that allows for easy change out of the bags. Can anyone offer a suggestion? I have seen the wire units the span the rails but I am looking for something with a little more substance.
Thanks,
D

Venom CC, Wayne Farrow.

 

[David Santistevan]

Decided to roll my own, I will use Nylon or PETG for the build. Ready to print.

 

[Troy Hammons]

These work well for Baxter bags in riggers. 3M double sticky tape to the front bulkhead

d.

 

[David Santistevan]

Okay this design turned out really well. It weighs nothing and is very strong. I am struggling a little bit with printing Nylon (PA) as it is pretty particular. However my last two prints have been very close. It should be fuel and waterproof with a lot of strength. I should be able to change one if these at the pond in just a few minutes.I will put a slight V in it for monos.
D

 

[Jerry Muro]

are you going to make these available for purchase?

 

[David Santistevan]

are you going to make these available for purchase?

Hey Jerry,
I am not really in that business however I will post the STL file here for anyone that wants to print one

 

[Jerry Muro]

Ok great

 

[Oscar Love]

Hey Jerry,
I am not really in that business however I will post the STL file here for anyone that wants to print one

Hello David, would you send me the stl please?

 

[the german]

Ohhhh some fancy color right there lol.
Great job David !

Alex

 

[David Santistevan]

Here is the STL file. Let me know if you have any issues with it.
I highly recommend that you print this using PA (Nylon), ABS will not withstand the fuel and the micro organisms in the pond will eat PLA. PETG is also a good choice and a little easier to print than PA.


D

 

[David Santistevan]

Ohhhh some fancy color right there lol.
Great job David !

Alex

Hi Alex, I hope you had a wonderful Thanksgiving my friend!

 

[Mike Bontoft]

Here is the STL file. Let me know if you have any issues with it.
I highly recommend that you print this using PA (Nylon), ABS will not withstand the fuel and the micro organisms in the pond will eat PLA. PETG is also a good choice and a little easier to print than PA.


D

Much appreciated David. It’s in the works.

 

[Oscar Love]

Thanks David!

 

[David Santistevan]

PETG seems to give me the best result for this project. I have tried several chemical and oil resistant filaments but PETG was the right solution. In the end I feel like PA (Nylon) was hard to print and was brittle if not exactly right in the print. I will post pics of my final print.

 

[Oscar Love]

Thanks again David! I printed a few for Ronnie using PETG and they came out good.

 

[David Santistevan]

Thanks again David! I printed a few for Ronnie using PETG and they came out good.

They look great, let me know how they work out and let me know if you have suggested changes.

 

[XtremeRcBoats]

They look great, let me know how they work out and let me know if you have suggested changes.

It looks so simple and comes out really nice. 3d printer is still on my wishlist. What kind of program do you use to draw this?

 

[David Santistevan]

It looks so simple and comes out really nice. 3d printer is still on my wishlist. What kind of program do you use to draw this?

I use Fusion 3D for my CAD drawings