Impulse 26 brushless conversion!!

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

geoffrey marshall

Active Member
Joined
Oct 30, 2011
Messages
41
Ok guys, this is my first electric boat. I have taken the motor and esc from a wrecked Motley Crew and put them in a Proboat Impulse 26! I just have one question...what prop should I try first? Not sure if the electronics in the Motley Crew were original so here are some pics to go by. Thanks!!

impulse 26 (1).JPG

impulse 26 (2).JPG

impulse 26 (3).JPG
 
Having designed and done a lot of testing with this boat... I would suggest something along the lines of a 440/3, or an ABC 42x55 for starters... The stock prop should actually work as well, as it's basically a Prather 215. Should be FUN! I've done some testing using a pretty hot 2S system in this hull and it's amazing how well it handles for such an inexpensive hull. It will likely need some much larger turn-fins, however, as you'll find it tends to let go under hard cornering when the water gets choppy. Should be easy to add.
 
Having designed and done a lot of testing with this boat... I would suggest something along the lines of a 440/3, or an ABC 42x55 for starters... The stock prop should actually work as well, as it's basically a Prather 215. Should be FUN! I've done some testing using a pretty hot 2S system in this hull and it's amazing how well it handles for such an inexpensive hull. It will likely need some much larger turn-fins, however, as you'll find it tends to let go under hard cornering when the water gets choppy. Should be easy to add.
Thanks! I have found a Prather S220 to be the best so far! Thanks
 
Back
Top