I present

[David Ashcroft]

The 90/101 X /F mono 70mph+ prop

 

[XtremeRcBoats]

CoCr?

 

[Daniel's Racing]

Has anyone else ever tried many of their gas props on their 1.01 X mono's ?

Many gas prop numbers work on the X mono with the 1.01's really well. You will have speed and acceleration as well as great handling with many of them. The 7016 and 6717 just a couple but many others rip on these big nitro engines.

Same for nitro cats with 1.01. Thy pull the same prop as you would use for gas. Dead nut perfect prop was a gas prop.
Bought every recommended nitro prop from the prop gods for a Conquest cat and my worst gas prop still did better on it.
It ran 80 with a good gas prop. Best nitro one I ever had made was barely over 70 mph.

 

[BigChuck]

Actually...YES. But that is not PUBLIC INFORMATION....

 

[john v]

i get all my gas props from bob austin, he does a great job

 

[Daniel's Racing]

i get all my gas props from bob austin, he does a great job

But have you run any of them on a X mono with a 1.01

Bob's are some of the best there is.

A few good gas ones I am referring to running on a 1.01 actually were Bob's props.

 

[shoboat]

Boaters,

It would be more helpful if the gas propellers were indexed,
so you would know what you are running. It does not take
very long to index a good propeller once it is finished. The
biggest advantage is the people buying the propeller know
what they bought, and where to put it in their prop box .
Also, if it runs well it is much easier to reproduce once you
have the card that has the actual numbers on it. The prop
charts are not very accurate.

David,

Was that an Octura X-470 V-Cut copy from Peter?

Enjoy Testing,

Mark Sholund

 

[David Ashcroft]

Boaters,

It would be more helpful if the gas propellers were indexed,
so you would know what you are running. It does not take
very long to index a good propeller once it is finished. The
biggest advantage is the people buying the propeller know
what they bought, and where to put it in their prop box .
Also, if it runs well it is much easier to reproduce once you
have the card that has the actual numbers on it. The prop
charts are not very accurate.

David,

Was that an Octura X-470 V-Cut copy from Peter?

Enjoy Testing,

Mark Sholund

Hello Mark I would be confident in saying it is not a copy of x470 size propeller.

 

[BigChuck]

X-467.. either way.

 

[David Ashcroft]

X-467.. either way.

Big chuck no..

 

[David Ashcroft]

Big chuck no..

I don't have a prop gauge so don't know pitch,cup etc..
I remembered reading years ago that showers and Simpson ran 1cube microbursts and using 3014 props .reaching 75mph

 

[Kris Flynn]

those AL1 (names after Adrian Laurie) props were awesome 10 years ago on my X mono

 

[John Dooling]

But have you run any of them on a X mono with a 1.01

Bob's are some of the best there is.

A few good gas ones I am referring to running on a 1.01 actually were Bob's props.

Daniel, after I spoke to you about this I tried a couple of small 7016’s. For me there was no noticeable difference from the X647 but… I’m running a NR.91, not a CMB .90 or 1.01. I’ve been warned that trying these props
with my motors might not work out well, lol. I’m gonna put a 1.01 in it and let all the gas props rip.

 

[John Dooling]

The 90/101 X /F mono 70mph+ prop

David, is this something that will be available to everyone? Looks like an AL1 blade shape.

 

[David Ashcroft]

David, is this something that will be available to everyone? Looks like an AL1 blade shape.

Yes it's been available for many years ,,my old nr.91 pulled that AL1 prop no problems.
Mark sholund can prepare a fast x467 for you if required also..

 

[David Ashcroft]

David, is this something that will be available to everyone? Looks like an AL1 blade shape.

[email protected]