how to move coil on quickdraw engine to vertical

[john bass]

need to fit new quickdraw in new Eagle SGX tub...need red coil up in front of jug

 

[rhomodel]

It depends if it is a pioneer or older style. for the pioneer there is an ignition plate with a recess so it will clear the bulge of the cast cylinder. Then you also need to use the old keyway ( not the pioneer one) as your ignition tming would be 90 degree off...

I bought a second hand QDP that has this recesss in the ignition plate. QD might selle them or you need to seek someone who can mill it out for you.

 

[Roger Lee Hooks Sr]

need to fit new quickdraw in new Eagle SGX tub...need red coil up in front of jug

http://double-aceracingproducts.com/catalog/product_info.php?cPath=62&products_id=223

 

[john bass]

it is the red coil that i need to move...my new Eagle is the narrow 3.5 inside width...ijust fount out that the Quickdraw needs a 5inch width tub..oh well back to the drawing board

 

[RaceMechaniX]

Hopefully Andy will chime in here. He ran a 30.5cc pioneer in a customers boat recently. As rhomodel pointed out you need to make a hydrid engine with the OE woodruff key position and a pocketed red coil mount. The other option is switching to an electronic ignition which is more involved.

 

[LohringMiller]

A long time ago Mike Bontoft ran Quickdraws in an Eagle. Rear exhaust was the way to go.

Lohring Miller

 

[henry velasco]

I understand QD now make's it with the red coil at 12:00 o-clock